The LTC®1250 is a high performance, very low noise zerodrift operational amplifier. The LTC1250's combination of low front-end noise and DC precision makes it ideal for use with low impedance bridge transducers. The LTC1250 features typical input noise of 0.75µVP-P from 0.1Hz to 10Hz, and 0.2µVP-P from 0.1Hz to 1Hz. The LTC1250 has DC to 1Hz noise of 0.35µVP-P, surpassing that of low noise bipolar parts including the OP-07, OP-77, and LT1012. The LTC1250 uses the industry-standard single op amp pinout, and requires no external components or nulling signals, allowing it to be a plug-in replacement for bipolar op amps.
The LTC1250 incorporates an improved output stage capable of driving 4.3V into a 1k load with a single 5V supply; it will swing ±4.9V into 5k with ±5V supplies. The input common mode range includes ground with single power supply voltages above 12V. Supply current is 3mA with a ±5V supply, and overload recovery times from positive and negative saturation are 0.5ms and 1.5ms, respectively. The internal nulling clock is set at 5kHz for optimum low frequency noise and offset drift; no external connections are necessary.
The LTC1250 is available in a standard 8-pin plastic DIP and 8-pin SO packages.
Protected by U.S. Patents including 4933642
产品特点 Features
参数 |
应用
典型应用图 |
器件型号 | 封装 | 引脚 | 温度 | 价格 (以 1 ~ 99 片为批量) | 价格 (以 1000 片为批量) * |
LTC1250CN8 | PDIP | 8 | C | $3.70 | $2.85 |
LTC1250CN8#PBF | PDIP | 8 | C | $3.70 | $2.85 |
LTC1250CS8 | SO | 8 | C | $4.20 | $3.25 |
LTC1250CS8#PBF | SO | 8 | C | $4.20 | $3.25 |
LTC1250CS8#TR | SO | 8 | C | $3.31 | |
LTC1250CS8#TRPBF | SO | 8 | C | $3.31 |