CBTL06DP212EE High-performance DisplayPort Gen2 2 : 1 multiplexer
CBTL06DP212 is a high performance multi-channel Generation 2 multiplexer meant for DisplayPort (DP) v1.2, v1.1a or Embedded DisplayPort applications operating at data rate of 1.62 Gbit/s, 2.7 Gbit/s or 5.4 Gbit/s. It is designed using NXP proprietary high-bandwidth pass-gate technology and it can be used for 1 : 2 switching or 2 : 1 multiplexing of four high-speed differential AC-coupled DP channels. Further, it is capable of switching/multiplexing of Hot Plug Detect (HPD) signal as well as Auxiliary (AUX) and Display Data Channel (DDC) signals. In order to support GPUs/CPUs that have dedicated AUX and DDC I/Os, CBTL06DP212 provides an additional level of multiplexing of AUX and DDC signals delivering true flexibility and choice.
A typical application of CBTL06DP212 is on motherboards where one of two GPU DisplayPort sources needs to be selected to connect to a DisplayPort sink device or connector. A controller chip selects which path to use by setting a select signal HIGH or LOW. Due to the bidirectional nature of the signal paths, CBTL06DP212 can also be used in the reverse topology, e.g., to connect one display source device to one of two display sink devices or connectors
产品特点 Features
- 1 : 2 switching or 2 : 1 multiplexing of DisplayPort (v1.2 - 5.4 Gbit/s) signals
- 4 high-speed differential channels with 2 : 1 multiplexing/switching for DisplayPort main link signals
- 1 channel with 4 : 1 multiplexing/switching for AUX or DDC signals
- 1 channel with 2 : 1 multiplexing/switching for HPD signal
- High-bandwidth: 5 GHz at -3 dB
- Low insertion loss:
- -0.5 dB at 100 MHz
- -3 dB at 5 GHz
- Low crosstalk: -35 dB at 3 GHz
- Low off-state isolation: -30 dB at 3 GHz
- Low return loss: -8 dB at 3 GHz
- Very low intra-pair skew (5 ps typical)
- Very low inter-pair skew (< 80 ps)
- Switch/multiplexer position select CMOS input
- DDC and AUX ports tolerant to being pulled to +5 V via 2.2 kΩ resistor
- Supports HDMI/DVI incorrect dongle connection
- Single 3.3 V power supply
- Operation current of 2 mA typical
- ESD 8 kV HBM, 1 kV CDM
- ESD 2 kV HBM, 500 V CDM for control pins
- Available in 5 mm × 5 mm, 0.5 mm ball pitch TFBGA48 package
|
应用
- Motherboard applications requiring DisplayPort and PCI Express switching/multiplexing
- Docking stations
- Notebook computers
- Chip sets requiring flexible allocation of PCI Express or DisplayPort I/O pins to board connectors
产品实物图
|
封装
型号 |
可订购的器件编号 |
订购码 (12NC) |
产品状态 |
封装 |
CBTL06DP212EE |
9352 941 11118 |
CBTL06DP212EE,118 |
量产 |
TFBGA48
(SOT918-1) |
订货和供应
型号 |
订购码 (12NC) |
可订购的器件编号 |
化学成分 |
CBTL06DP212EE |
9352 941 11118 |
CBTL06DP212EE,118 |
CBTL06DP212EE |
CBTL06DP212EE 技术支持
档案名称 |
标题 |
类型 |
格式 |
CBTL06DP212EE |
High-performance DisplayPort Gen2 2 : 1 multiplexer |
Data sheet |
pdf |
AN10798 |
DisplayPort PCB layout guidelines |
Application note |
pdf |
AN10417 |
SC16IS760/762 Fast IrDA mode
|
Application note |
pdf |
AN10428 |
UART-SPI Gateway for Philips SPI slave bridges
|
Application note |
pdf |
AN10462 |
SPI programming for Philips Bridge ICs
|
Application note |
pdf |
AN10485 |
SDA pin connection in SPI mode
|
Application note |
pdf |
AN10486 |
Automatic RS-485 address detection
|
Application note |
pdf |
AN10571 |
Sleep programming for NXP bridge ICs
|
Application note |
pdf |
AN10452 |
Interfacing Philips Bridge IC with Philips microcontroller
|
Application note |
pdf |
75015676 |
Low-power bridges for I2C or SPI to UART or IrDA or GPIO; NXP low-power bridges SC16IS750/52/60/62
|
Leaflet |
pdf |