CLRC632 Multiple protocol contactless reader IC (MIFARE/I-CODE1)

The CLRC632 is a member of a new family of highly integrated reader ICs for contactless communication at 13.56 MHz. This family of reader ICs provide:

All protocol layers of the ISO/IEC 14443 A and ISO/IEC 14443 B communication standards are supported provided:

Using this NXP Semiconductors device according to ISO/IEC 14443 B may infringe third party patent rights.

The CLRC632 supports contactless communication using MIFARE higher baud rates (see Section 9.12 on page 40). The receiver module provides a robust and efficient demodulation/decoding circuitry implementation for compatible transponder signals (see Section 9.10 on page 34).

The digital module, manages the complete ISO/IEC 14443 standard framing and error detection (parity and CRC). In addition, it supports the fast MIFARE security algorithm for authenticating the MIFARE products (see Section 9.14 on page 42).

All layers of the I-CODE1 and ISO/IEC 15693 protocols are supported by the CLRC632. The receiver module provides a robust and efficient demodulation/decoding circuitry implementation for I-CODE1 and ISO/IEC 15693 compatible transponder signals. The digital module handles I-CODE1 and ISO/IEC 15693 framing and error detection (CRC).

The internal transmitter module (Section 9.9 on page 31) can directly drive an antenna designed for a proximity operating distance up to 100 mm without any additional active circuitry.

A parallel interface can be directly connected to any 8-bit microprocessor to ensure reader/terminal design flexibility. In addition, Serial Peripheral Interface (SPI) compatibility is supported (see Section 9.1.4 on page 9).

产品特点 Features
  • Highly integrated analog circuitry for demodulating and decoding card/label response
  • Buffered output drivers enable antenna connection using the minimum of external components
  • Proximity operating distance up to 100 mm
  • Supports both ISO/IEC 14443 A and ISO/IEC 14443 B standards
  • Supports MIFARE dual-interface card ICs and the MIFARE Mini, MIFARE 1K, MIFARE 4K protocols
  • Contactless communication at MIFARE higher baud rates (up to 424 kBd)
  • Supports both I-CODE1 and ISO/IEC 15693 protocols
  • Crypto1 and secure non-volatile internal key memory
  • Pin-compatible with the MFRC500, MFRC530, MFRC531 and the SLRC400
  • Parallel microprocessor interface with internal address latch and IRQ line
  • SPI compatibility
  • Flexible interrupt handling
  • Automatic detection of parallel microprocessor interface type
  • 64-byte send and receive FIFO buffer
  • Hard reset with low power function
  • Software controlled Power-down mode
  • Programmable timer
  • Unique serial number
  • User programmable start-up configuration
  • Bit-oriented and byte oriented framing
  • Independent power supply pins for analog, digital and transmitter modules
  • Internal oscillator buffer optimized for low phase jitter enables 13.56 MHz quartz connection
  • Clock frequency filtering
  • 3.3 V to 5 V operation for transmitter in short range and proximity applications
  • 3.3 V or 5 V operation for the digital module
应用
  • Electronic payment systems
  • Identification systems
  • Access control systems
  • Subscriber services
  • Banking systems
  • Digital content systems
产品实物图
CLRC632 产品实物图
封装
型号 订购码 (12NC) 可订购的器件编号 产品状态 封装
CLRC63201T/0FE 9352 696 90118 CLRC63201T/0FE,118 量产 SO32 (SOT287-1)
CLRC63201T/0FE 9352 696 90112 CLRC63201T/0FE,112 量产 SO32 (SOT287-1)
订货和供应
型号 订购码 (12NC) 可订购的器件编号 化学成分
CLRC63201T/0FE 9352 696 90118 CLRC63201T/0FE,118 CLRC63201T/0FE
CLRC63201T/0FE 9352 696 90112 CLRC63201T/0FE,112 CLRC63201T/0FE
CLRC632 技术支持
档案名称 标题 类型 格式
CLRC632 Multiple protocol contactless reader IC (MIFARE/I-CODE1) Data sheet pdf
PEMI_Family PEMI Family SPICE models SPICE model zip