PN512 Full NFC Forum Compliant Solution

The PN512 is a highly integrated transceiver IC for contactless communication at 13.56 MHz. This transceiver IC utilizes an outstanding modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz.

Different available versions

The PN512 is available in three versions:

General description

The PN512 transceiver ICs support 4 different operating modes:

Enabled in Reader/Writer mode for ISO/IEC 14443A/MIFARE, the PN512’s internal transmitter part is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/ MIFARE cards and transponders without additional active circuitry. The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO/IEC 14443A/MIFARE compatible cards and transponders. The digital part handles the complete ISO/IEC 14443A framing and error detection (Parity & CRC).

The PN512 supports MIFARE 1K or MIFARE 4K emulation products. The PN512 supports contactless communication using MIFARE higher transfer speeds up to 424 kbit/s in both directions.

Enabled in Reader/Writer mode for FeliCa, the PN512 transceiver IC supports the FeliCa communication scheme. The receiver part provides a robust and efficient implementation of the demodulation and decoding circuitry for FeliCa coded signals. The digital part handles the FeliCa framing and error detection like CRC. The PN512 supports contactless communication using FeliCa Higher transfer speeds up to 424 kbit/s in both directions.

The PN512 supports all layers of the ISO/IEC 14443B reader/writer communication scheme, given correct implementation of additional components, like oscillator, power supply, coil etc. and provided that standardized protocols, e.g. like ISO/IEC 14443-4 and/or ISO/IEC 14443B anticollision are correctly implemented.

In Card Operation mode, the PN512 transceiver IC is able to answer to a reader/writer command either according to the FeliCa or ISO/IEC 14443A/MIFARE card interface scheme. The PN512 generates the digital load modulated signals and in addition with an external circuit the answer can be sent back to the reader/writer. A complete card functionality is only possible in combination with a secure IC using the S²C interface.

Additionally, the PN512 transceiver IC offers the possibility to communicate directly to an NFCIP-1 device in the NFCIP-1 mode. The NFCIP-1 mode offers different communication mode and transfer speeds up to 424 kbit/s according to the Ecma 340 and ISO/IEC 18092 NFCIP-1 Standard. The digital part handles the complete NFCIP-1 framing and error detection.

Various host controller interfaces are implemented:

A purchaser of this NXP IC has to take care for appropriate third party patent licenses

产品特点 Features
  • Highly integrated analog circuitry to demodulate and decode responses
  • Buffered output drivers for connecting an antenna with the minimum number of external components
  • Integrated RF Level detector
  • Integrated data mode detector
  • Supports ISO/IEC 14443 A/MIFARE
  • Supports ISO/IEC 14443 B Read/Write modes
  • Typical operating distance in Read/Write mode up to 50 mm depending on the antenna size and tuning
  • Typical operating distance in NFCIP-1 mode up to 50 mm depending on the antenna size and tuning and power supply
  • Typical operating distance in ISO/IEC 14443A/MIFARE card or FeliCa Card Operation mode of about 100 mm depending on the antenna size and tuning and the external field strength
  • Supports MIFARE 1K or MIFARE 4K emulation encryption in Reader/Writer mode
  • ISO/IEC 14443A higher transfer speed communication at 212 kbit/s and 424 kbit/s
  • Contactless communication according to the FeliCa scheme at 212 kbit/s and 424 kbit/s
  • Integrated RF interface for NFCIP-1 up to 424 kbit/s
  • S²C interface
  • Additional power supply to directly supply the smart card IC connected via S²C
  • Supported host interfaces:
    • SPI up to 10 Mbit/s
    • I²C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
    • RS232 Serial UART up to 1228.8 kBd, with voltage levels dependant on pin voltage supply
    • 8-bit parallel interface with and without Address Latch Enable
  • FIFO buffer handles 64 byte send and receive
  • Flexible interrupt modes
  • Hard reset with low power function
  • Power-down mode per software
  • Programmable timer
  • Internal oscillator for connection to 27.12 MHz quartz crystal
  • 2.5 V to 3.6 V power supply
  • CRC coprocessor
  • Programmable I/O pins
  • Internal self-test
应用
  • Electronic payment systems
  • Identification systems
  • Access control systems
  • Subscriber services
  • Digital content systems
产品实物图
PN512 产品实物图
封装
型号 订购码 (12NC) 可订购的器件编号 产品状态 封装
PN5120A0HN/C1 9352 800 79557 PN5120A0HN/C1,557 量产 HVQFN40 (SOT618-1)
PN5120A0HN/C1 9352 800 79551 PN5120A0HN/C1,551 量产 HVQFN40 (SOT618-1)
PN5120A0HN/C1 9352 800 79518 PN5120A0HN/C1,518 量产 HVQFN40 (SOT618-1)
PN5120A0HN/C2 9352 921 14551 PN5120A0HN/C2,551 量产 HVQFN40 (SOT618-1)
PN5120A0HN/C2 9352 921 14557 PN5120A0HN/C2,557 量产 HVQFN40 (SOT618-1)
PN5120A0HN/C2 9352 921 14518 PN5120A0HN/C2,518 量产 HVQFN40 (SOT618-1)
PN5120A0HN1/C1 9352 805 37118 PN5120A0HN1/C1,118 量产 HVQFN32 (SOT617-1)
PN5120A0HN1/C1 9352 805 37151 PN5120A0HN1/C1,151 量产 HVQFN32 (SOT617-1)
PN5120A0HN1/C1 9352 805 37157 PN5120A0HN1/C1,157 量产 HVQFN32 (SOT617-1)
PN5120A0HN1/C2 9352 921 15118 PN5120A0HN1/C2,118 量产 HVQFN32 (SOT617-1)
PN5120A0HN1/C2 9352 921 15157 PN5120A0HN1/C2,157 量产 HVQFN32 (SOT617-1)
PN5120A0HN1/C2 9352 921 15151 PN5120A0HN1/C2,151 量产 HVQFN32 (SOT617-1)
PN512AA0HN1/C2 9352 968 54557 PN512AA0HN1/C2,557 量产 HVQFN32 (SOT617-1)
PN512AA0HN1/C2 9352 968 54551 PN512AA0HN1/C2,551 量产 HVQFN32 (SOT617-1)
PN512AA0HN1/C2 9352 968 54518 PN512AA0HN1/C2,518 量产 HVQFN32 (SOT617-1)
PN512AA0HN1/C2BI 9352 968 55551 PN512AA0HN1/C2BI,5 量产 HVQFN32 (SOT617-1)
PN512AA0HN1/C2BI 9352 968 55557 PN512AA0HN1/C2BI:5 量产 HVQFN32 (SOT617-1)
PN512AA0HN1/C2BI 9352 968 55518 PN512AA0HN1/C2BIY 量产 HVQFN32 (SOT617-1)
订货和供应
型号 订购码 (12NC) 可订购的器件编号 化学成分
PN5120A0HN/C1 9352 800 79557 PN5120A0HN/C1,557 PN5120A0HN/C1
PN5120A0HN/C1 9352 800 79551 PN5120A0HN/C1,551 PN5120A0HN/C1
PN5120A0HN/C1 9352 800 79518 PN5120A0HN/C1,518 PN5120A0HN/C1
PN5120A0HN/C2 9352 921 14551 PN5120A0HN/C2,551 PN5120A0HN/C2
PN5120A0HN/C2 9352 921 14557 PN5120A0HN/C2,557 PN5120A0HN/C2
PN5120A0HN/C2 9352 921 14518 PN5120A0HN/C2,518 PN5120A0HN/C2
PN5120A0HN1/C1 9352 805 37118 PN5120A0HN1/C1,118 PN5120A0HN1/C1
PN5120A0HN1/C1 9352 805 37151 PN5120A0HN1/C1,151 PN5120A0HN1/C1
PN5120A0HN1/C1 9352 805 37157 PN5120A0HN1/C1,157 PN5120A0HN1/C1
PN5120A0HN1/C2 9352 921 15118 PN5120A0HN1/C2,118 PN5120A0HN1/C2
PN5120A0HN1/C2 9352 921 15157 PN5120A0HN1/C2,157 PN5120A0HN1/C2
PN5120A0HN1/C2 9352 921 15151 PN5120A0HN1/C2,151 PN5120A0HN1/C2
PN512AA0HN1/C2 9352 968 54557 PN512AA0HN1/C2,557 PN512AA0HN1/C2
PN512AA0HN1/C2 9352 968 54551 PN512AA0HN1/C2,551 PN512AA0HN1/C2
PN512AA0HN1/C2 9352 968 54518 PN512AA0HN1/C2,518 PN512AA0HN1/C2
PN512AA0HN1/C2BI 9352 968 55551 PN512AA0HN1/C2BI,5 PN512AA0HN1/C2BI
PN512AA0HN1/C2BI 9352 968 55557 PN512AA0HN1/C2BI:5 PN512AA0HN1/C2BI
PN512AA0HN1/C2BI 9352 968 55518 PN512AA0HN1/C2BIY PN512AA0HN1/C2BI
PN512 技术支持
档案名称 标题 类型 格式
PN512 Transmission module Data sheet pdf
AN98080 Read/write devices based on the HITAG read/write IC HTRC110 Application note pdf
AN11022 CLRC663 Quickstart Guide Application note pdf
AN11211 Quick Start Up Guide RC663 Blueboard Application note pdf
AN11256 Migration guide CLRC663 to derivates Application note pdf
AN11342 How to Scale Down the NXP Reader Library Application note pdf
939775017138 Next-generation multiprotocol Full NFC Forum Compliant Solution (CLRC663 only) Leaflet pdf
939775017290 The next generation of multiprotocol contactless proximity reader ICs Leaflet pdf
210910 CLRC663 redboard scripts Software zip
200312 NXP Reader Library version 2.1 with Visual C++ project Software zip
NXP_RFID_213911 Eagle parts library Software zip
UM10663 NXP Reader Library User Manual based on CLRC663 and PN512 Blueboard Reader projects User manual pdf