PN5120A0HN1 Full NFC Forum Compliant Solution

The PN512 is a highly integrated transceiver IC for contactless communication at 13.56 MHz. This transceiver IC utilizes an outstanding modulation and demodulation concept completely integrated for different kinds of contactless communication methods and protocols at 13.56 MHz.

Different available versions

The PN512 is available in three versions:

PN5120A0HN1/C2 (HVQFN32) and PN5120A0HN/C2 (HVQFN40), hereafter named as version 2.0
PN512AA0HN1/C2 (HVQFN32) and PN512AA0HN1/C2BI (HVQFN32 with Burn In), hereafter named as industrial version, fulfilling the automotive qualification stated in AEC-Q100 Grade 3 from the Automotive Electronics Council, defining the critical stress test qualification for automotive integrated circuits (ICs).
PN5120A0HN1/C1(HVQFN32) and PN5120A0HN/C1 (HVQFN40), hereafter named as version 1.0

General description

The PN512 transceiver ICs support 4 different operating modes:

Reader/Writer mode supporting ISO/IEC 14443A/MIFARE and FeliCa scheme
Reader/Writer mode supporting ISO/IEC 14443B
Card Operation mode supporting ISO/IEC 14443A/MIFARE and FeliCa scheme
NFCIP-1 mode

Enabled in Reader/Writer mode for ISO/IEC 14443A/MIFARE, the PN512’s internal transmitter part is able to drive a reader/writer antenna designed to communicate with ISO/IEC 14443A/ MIFARE cards and transponders without additional active circuitry. The receiver part provides a robust and efficient implementation of a demodulation and decoding circuitry for signals from ISO/IEC 14443A/MIFARE compatible cards and transponders. The digital part handles the complete ISO/IEC 14443A framing and error detection (Parity & CRC).

The PN512 supports MIFARE 1K or MIFARE 4K emulation products. The PN512 supports contactless communication using MIFARE higher transfer speeds up to 424 kbit/s in both directions.

Enabled in Reader/Writer mode for FeliCa, the PN512 transceiver IC supports the FeliCa communication scheme. The receiver part provides a robust and efficient implementation of the demodulation and decoding circuitry for FeliCa coded signals. The digital part handles the FeliCa framing and error detection like CRC. The PN512 supports contactless communication using FeliCa Higher transfer speeds up to 424 kbit/s in both directions.

The PN512 supports all layers of the ISO/IEC 14443B reader/writer communication scheme, given correct implementation of additional components, like oscillator, power supply, coil etc. and provided that standardized protocols, e.g. like ISO/IEC 14443-4 and/or ISO/IEC 14443B anticollision are correctly implemented.

In Card Operation mode, the PN512 transceiver IC is able to answer to a reader/writer command either according to the FeliCa or ISO/IEC 14443A/MIFARE card interface scheme. The PN512 generates the digital load modulated signals and in addition with an external circuit the answer can be sent back to the reader/writer. A complete card functionality is only possible in combination with a secure IC using the S²C interface.

Additionally, the PN512 transceiver IC offers the possibility to communicate directly to an NFCIP-1 device in the NFCIP-1 mode. The NFCIP-1 mode offers different communication mode and transfer speeds up to 424 kbit/s according to the Ecma 340 and ISO/IEC 18092 NFCIP-1 Standard. The digital part handles the complete NFCIP-1 framing and error detection.

Various host controller interfaces are implemented:

8-bit parallel interface
SPI interface
Serial UART (similar to RS232 with voltage levels according pad voltage supply)
I²C interface.

A purchaser of this NXP IC has to take care for appropriate third party patent licenses

产品特点 Features

Highly integrated analog circuitry to demodulate and decode responses
Buffered output drivers for connecting an antenna with the minimum number of external components
Integrated RF Level detector
Integrated data mode detector
Supports ISO/IEC 14443 A/MIFARE
Supports ISO/IEC 14443 B Read/Write modes
Typical operating distance in Read/Write mode up to 50 mm depending on the antenna size and tuning
Typical operating distance in NFCIP-1 mode up to 50 mm depending on the antenna size and tuning and power supply
Typical operating distance in ISO/IEC 14443A/MIFARE card or FeliCa Card Operation mode of about 100 mm depending on the antenna size and tuning and the external field strength
Supports MIFARE 1K or MIFARE 4K emulation encryption in Reader/Writer mode
ISO/IEC 14443A higher transfer speed communication at 212 kbit/s and 424 kbit/s
Contactless communication according to the FeliCa scheme at 212 kbit/s and 424 kbit/s
Integrated RF interface for NFCIP-1 up to 424 kbit/s
S²C interface
Additional power supply to directly supply the smart card IC connected via S²C
Supported host interfaces:
- SPI up to 10 Mbit/s
- I²C-bus interface up to 400 kBd in Fast mode, up to 3400 kBd in High-speed mode
- RS232 Serial UART up to 1228.8 kBd, with voltage levels dependant on pin voltage supply
- 8-bit parallel interface with and without Address Latch Enable
FIFO buffer handles 64 byte send and receive
Flexible interrupt modes
Hard reset with low power function
Power-down mode per software
Programmable timer
Internal oscillator for connection to 27.12 MHz quartz crystal
2.5 V to 3.6 V power supply
CRC coprocessor
Programmable I/O pins
Internal self-test

应用

Electronic payment systems
Identification systems
Access control systems
Subscriber services
Digital content systems

产品实物图

封装

型号	订购码 (12NC)	可订购的器件编号	产品状态	封装
PN5120A0HN1/C1	9352 805 37118	PN5120A0HN1/C1,118	量产	HVQFN32 (SOT617-1)
PN5120A0HN1/C1	9352 805 37151	PN5120A0HN1/C1,151	量产	HVQFN32 (SOT617-1)
PN5120A0HN1/C1	9352 805 37157	PN5120A0HN1/C1,157	量产	HVQFN32 (SOT617-1)
PN5120A0HN1/C2	9352 921 15118	PN5120A0HN1/C2,118	量产	HVQFN32 (SOT617-1)
PN5120A0HN1/C2	9352 921 15157	PN5120A0HN1/C2,157	量产	HVQFN32 (SOT617-1)
PN5120A0HN1/C2	9352 921 15151	PN5120A0HN1/C2,151	量产	HVQFN32 (SOT617-1)

订货和供应

型号	订购码 (12NC)	可订购的器件编号	化学成分
PN5120A0HN1/C1	9352 805 37118	PN5120A0HN1/C1,118	PN5120A0HN1/C1
PN5120A0HN1/C1	9352 805 37151	PN5120A0HN1/C1,151	PN5120A0HN1/C1
PN5120A0HN1/C1	9352 805 37157	PN5120A0HN1/C1,157	PN5120A0HN1/C1
PN5120A0HN1/C2	9352 921 15118	PN5120A0HN1/C2,118	PN5120A0HN1/C2
PN5120A0HN1/C2	9352 921 15157	PN5120A0HN1/C2,157	PN5120A0HN1/C2
PN5120A0HN1/C2	9352 921 15151	PN5120A0HN1/C2,151	PN5120A0HN1/C2

PN5120A0HN1 技术支持

档案名称	标题	类型	格式
PN5120A0HN1	Transmission module	Data sheet	pdf
AN98080	Read/write devices based on the HITAG read/write IC HTRC110	Application note	pdf
AN11022	CLRC663 Quickstart Guide	Application note	pdf
AN11211	Quick Start Up Guide RC663 Blueboard	Application note	pdf
AN11256	Migration guide CLRC663 to derivates	Application note	pdf
AN11342	How to Scale Down the NXP Reader Library	Application note	pdf
939775017138	Next-generation multiprotocol Full NFC Forum Compliant Solution (CLRC663 only)	Leaflet	pdf
939775017290	The next generation of multiprotocol contactless proximity reader ICs	Leaflet	pdf
210910	CLRC663 redboard scripts	Software	zip
200312	NXP Reader Library version 2.1 with Visual C++ project	Software	zip
NXP_RFID_213911	Eagle parts library	Software	zip
UM10663	NXP Reader Library User Manual based on CLRC663 and PN512 Blueboard Reader projects	User manual	pdf