The PTN3360B is a high-speed level shifter device which converts four lanes of low-swing AC-coupled differential input signals to DVI v1.0 and HDMI v1.3a compliant open-drain current-steering differential output signals, up to 2.5 Gbit/s per lane. Each of these lanes provides a level-shifting differential buffer to translate from low-swing AC-coupled differential signaling on the source side, to TMDS-type DC-coupled differential current-mode signaling terminated into 50 Ω to 3.3 V on the sink side. Additionally, the PTN3360B provides a single-ended active buffer for voltage translation of the HPD signal from 5 V on the sink side to 3.3 V on the source side and provides a channel for level shifting of the DDC channel (consisting of a clock and a data line) between 3.3 V source-side and 5 V sink-side. The DDC channel is implemented using pass-gate technology providing level shifting as well as disablement (isolation between source and sink) of the clock and data lines.
The low-swing AC-coupled differential input signals to the PTN3360B typically come from a display source with multi-mode I/O, which supports multiple display standards, e.g., DisplayPort, HDMI and DVI. While the input differential signals are configured to carry DVI or HDMI coded data, they do not comply with the electrical requirements of the DVI v1.0 or HDMI v1.3a specification. By using PTN3360B, chip set vendors are able to implement such reconfigurable I/Os on multi-mode display source devices, allowing the support of multiple display standards while keeping the number of chip set I/O pins low.
The PTN3360B main high-speed differential lanes feature low-swing self-biasing differential inputs which are compliant to the electrical specifications of DisplayPort Standard v1.1and/or PCI Express Standard v1.1, and open-drain current-steering differential outputs compliant to DVI v1.0 and HDMI v1.3a electrical specifications. The I²C-bus channel level-translates the DDC signals between 3.3 V (source) and 5.0 V (sink).
The PTN3360B is a fully featured HDMI as well as DVI level shifter. It is functionally equivalent to PTN3300A but provides higher speed performance and higher ESD robustness. The PTN3360B is also equivalent to PTN3360A with the exception that PTN3360B provides non-inverting level shifting on the HPD channel.
PTN3360B is powered from a single 3.3 V power supply consuming a small amount of power (120 mW typ.) and is offered in a 48-terminal HVQFN48 package
产品特点 FeaturesHigh-speed TMDS level shifting
DDC level shifting
HPD level shifting
General
|
产品实物图 |
型号 | 可订购的器件编号 | 订购码 (12NC) | 产品状态 | 封装 |
PTN3360BBS | 9352 881 09518 | PTN3360BBS,518 | 量产 | HVQFN48 (SOT619-1) |
型号 | 订购码 (12NC) | 可订购的器件编号 | 化学成分 |
PTN3360BBS | 9352 881 09518 | PTN3360BBS,518 | PTN3360BBS |
档案名称 | 标题 | 类型 | 格式 |
PTN3360BBS | Enhanced performance HDMI/DVI level shifter | Data sheet | |
AN10798 | DisplayPort PCB layout guidelines | Application note | |
AN257 | PTN products demo board documentation | Application note | |
AN257 | PTN3310/3311 board | Application note | |
AN10462 | SPI programming for Philips Bridge ICs | Application note | |
AN10485 | SDA pin connection in SPI mode | Application note | |
AN10486 | Automatic RS-485 address detection | Application note | |
AN10571 | Sleep programming for NXP bridge ICs | Application note | |
AN10452 | Interfacing Philips Bridge IC with Philips microcontroller | Application note | |
75015676 | Low-power bridges for I2C or SPI to UART or IrDA or GPIO; NXP low-power bridges SC16IS750/52/60/62 | Leaflet |