PTN36241BBS SuperSpeed USB 3.0 redriver

PTN36241B is a SuperSpeed USB 3.0 redriver IC that enhances signal quality by performing receive equalization on the deteriorated input signal followed by transmit de-emphasis maximizing system link performance. With its superior differential signal conditioning and enhancement capability, the device delivers significant flexibility and performance scaling for various systems with different PCB trace and cable channel conditions and still benefit from optimum power consumption.

PTN36241B is a dual-channel device that supports data signaling rate of 5 Gbit/s through each channel. PTN36241B has two channels: one channel is facing the USB host, and another channel is facing the USB peripheral or device. Each channel consists of a high-speed Transmit (Tx) differential lane and a high-speed Receive (Rx) differential lane.

PTN36241B has independent 5-level configuration pins for each channel to select receive equalization, transmit de-emphasis and output swing and these pins can be easily configured by board-strapping (for example, short, open, resistor). To support applications that require greater level of configurability, PTN36241B delivers intelligent multiplexing of I²C-bus interface onto 5-level configuration pins. By default, the device is configured with the board-strapped levels of configuration pins. When I²C-bus reads/writes are performed over these multiplexed pins, the device decodes I²C transactions and configures its internal functions appropriately.

PTN36241B has built-in advanced power management capability that enables significant power savings under various different USB 3.0 Low-power modes (U2/U3). It can detect LFPS signaling and link electrical conditions and can dynamically activate/de-activate internal circuitry and logic. The device performs these actions without host software intervention and conserves power.

PTN36241B will go through the compliance testing controlled by the internal state machine. No compliance pin is required.

PTN36241B is powered from 3.3 V supply and is available in HVQFN24 4 mm x 4 mm package with 0.5 mm pitch.

产品特点 Features

High-speed channel processing

  • Supports USB 3.0 specification (SuperSpeed only)
  • Support of 2 channels
  • Selectable receive equalization on each channel to recover from Inter Symbol Interference (ISI) and high-frequency losses, with provision to choose from five Equalization gain settings per channel
  • Selectable transmit de-emphasis and output swing on each channel delivers pre-compensation suited to channel conditions
  • Supports pin and I²C-bus programmable Input Signal Threshold setting to reliably work under different noise environments accommodating sensitivity needs
  • Integrated termination resistors provide impedance matching on both transmit and receive sides
  • Programmable termination resistor for receiver side
  • Automatic receiver termination indication and detection
  • Low active power: 330 mW/100 mA (typical), VDD = 3.3 V
  • Power-saving states:
    • 53 mW/16 mA (typical) when in U2/U3 states
    • 20 mW/6 mA (typical) when no connection detected
  • Excellent differential and common return loss performance
    • 14 dB differential and 15 dB common-mode return loss for 10 MHz to 1250 MHz
  • Flow-through pinout to ease PCB layout and minimize crosstalk effects
  • Hot Plug capable
  • Supports EasyCom that will go through the compliance testing controlled by the internal state machine
  • Power supply: VDD = 3.3 V ± 10 %
  • HVQFN24 4 mm × 4 mm package, 0.5 mm pitch; exposed center pad for thermal relief and electrical ground
  • ESD: 5 kV HBM, 1250 V CDM
  • Operating temperature range 0 °C to 85 °C

Enhancements

  • Intelligent I²C-bus multiplexing and 5-level logic configuration options (with patent-pending quinary pins) delivering ultimate flexibility
  • I²C-bus interface:
    • Standard-mode (100 kbit/s) or Fast-mode (400 kbit/s)
    • 3.3 V tolerant
应用
  • Notebook/netbook/nettop platforms
  • Docking stations
  • Desktop and AIO platforms
  • Active cables
  • Server and storage platforms
  • USB 3.0 peripherals like consumer/storage devices, printers or USB 3.0 capable hubs/repeaters
封装
型号 订购码 (12NC) 可订购的器件编号 产品状态 封装
PTN36241BBS 9352 960 76118 PTN36241BBS,118 量产 HVQFN24 (SOT616-3)
PTN36241BBS 9352 960 76128 PTN36241BBS,128 量产 HVQFN24 (SOT616-3)
PTN36241BBS 9352 960 76115 PTN36241BBS,115 量产 HVQFN24 (SOT616-3)
订货和供应
型号 订购码 (12NC) 可订购的器件编号 化学成分
PTN36241BBS 9352 960 76118 PTN36241BBS,118 PTN36241BBS
PTN36241BBS 9352 960 76128 PTN36241BBS,128 PTN36241BBS
PTN36241BBS 9352 960 76115 PTN36241BBS,115 PTN36241BBS
PTN36241BBS 技术支持
档案名称 标题 类型 格式
PTN36241BBS SuperSpeed USB 3.0 redriver Data sheet pdf
AN10853 ESD and EMC sensitivity of IC Application note pdf
UM10301 User Manual for NXP Real Time Clocks PCF85x3, PCA8565 and PCF2123, PCA2125 User manual pdf
UM10569 Store and transport requirements User manual pdf
R_10015 Chip-On-Glass (COG) - a cost-effective and reliable technology for LCD displays Other type pdf
UM10204 I2C-bus specification and user manual User manual pdf
UM10206 I2C Demonstration Board 2005-1 Quick Start Guide User manual pdf
UM10569 Store and transport requirements User manual pdf
UM10204_JA I2C-bus specification and user manual User manual pdf