产品特点 Features

• Complies with Universal Serial Bus Specification Rev. 2.0
• Supports data transfer at high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s)
• Two Original USB OHCI cores comply with Open Host Controller Interface Specification for USB Rev. 1.0a
• One Hi-Speed USB EHCI core complies with Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 1.0
• Supports PCI 32-bit, 33 MHz interface compliant with PCI Local Bus Specification Rev. 2.2, with support for D3cold standby and wake-up modes; all I/O pins are 3.3 V standard
• Compliant with PCI Bus Power Management Interface Specification Rev. 1.1 for all hosts (EHCI and OHCI), and supports all power states: D0, D1, D2, D3hot and D3cold
• CLKRUN support for mobile applications, such as internal notebook design
• Configurable subsystem ID and subsystem vendor ID through external EEPROM
• Digital and analog power separation for better Electro-Magnetic Interference (EMI) and ElectroStatic Discharge (ESD) protection
• Supports hot plug and play and remote wake-up of peripherals
• Supports individual power switching and individual overcurrent protection for downstream ports
• Supports partial dynamic port-routing capability for downstream ports that allows sharing of the same physical downstream ports between the Original USB Host Controller and the Hi-Speed USB Host Controller
• Uses 12 MHz crystal oscillator to reduce system cost and EMI emissions
• Supports dual power supply: PCI Vaux(3V3) and VCC
• Operates at +3.3 V power supply input
• Low power consumption
• Qualified in accordance with AEC-Q100
• Operating temperature range from -40 ℃ to +85 ℃
• Available in LQFP100 package

应用

This NXP USB product can only be used in automotive applications. Inclusion or use of the NXP USB products in other than automotive applications is not permitted and for your company’s own risk. Your company agrees to full indemnify NXP for any damages resulting from such inclusion or use