SC16C2550BIA44 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs

The SC16C2550B is a two channel Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data and vice versa. The UART can handle serial data rates up to 5 Mbit/s.

The SC16C2550B is pin compatible with the ST16C2550. It will power-up to be functionally equivalent to the 16C2450. The SC16C2550B provides enhanced UART functions with 16-byte FIFOs, modem control interface, DMA mode data transfer. The DMA mode data transfer is controlled by the FIFO trigger levels and the RXRDYn and TXRDYn signals. On-board status registers provide the user with error indications and operational status. System interrupts and modem control features may be tailored by software to meet specific user requirements. An internal loopback capability allows on-board diagnostics. Independent programmable baud rate generators are provided to select transmit and receive baud rates.

The SC16C2550B operates at 5 V, 3.3 V and 2.5 V and the industrial temperature range, and is available in plastic PLCC44, LQFP48, DIP40 and HVQFN32 packages

产品特点 Features

2 channel UART
5 V, 3.3 V and 2.5 V operation
5 V tolerant on input only pins
Industrial temperature range
Pin and functionally compatible to 16C2450 and software compatible with INS8250, SC16C550
Up to 5 Mbit/s data rate at 5 V and 3.3 V and 3 Mbit/s at 2.5 V
16-byte transmit FIFO to reduce the bandwidth requirement of the external CPU
16-byte receive FIFO with error flags to reduce the bandwidth requirement of the external CPU
Independent transmit and receive UART control
Four selectable Receive FIFO interrupt trigger levels
Software selectable baud rate generator
Standard asynchronous error and framing bits (Start, Stop and Parity Overrun Break)
Transmit, Receive, Line Status and Data Set interrupts independently controlled
Fully programmable character formatting:
- 5-bit, 6-bit, 7-bit or 8-bit characters
- Even, odd or no-parity formats
- 1, 1 1/2 or 2-stop bit
- Baud generation (DC to 5 Mbit/s)
False start-bit detection
Complete status reporting capabilities
3-state output TTL drive capabilities for bidirectional data bus and control bus
Line break generation and detection
Internal diagnostic capabilities:
- Loopback controls for communications link fault isolation
Prioritized interrupt system controls
Modem control functions (CTS, RTS, DSR, DTR, RI, DCD)

封装

型号	订购码 (12NC)	可订购的器件编号	产品状态	封装
SC16C2550BIA44	9352 744 07512	SC16C2550BIA44,512	量产	PLCC44 (SOT187-2)
SC16C2550BIA44	9352 744 07529	SC16C2550BIA44,529	量产	PLCC44 (SOT187-2)
SC16C2550BIA44	9352 744 07518	SC16C2550BIA44,518	量产	PLCC44 (SOT187-2)

订货和供应

型号	订购码 (12NC)	可订购的器件编号	化学成分
SC16C2550BIA44	9352 744 07512	SC16C2550BIA44,512	SC16C2550BIA44
SC16C2550BIA44	9352 744 07529	SC16C2550BIA44,529	SC16C2550BIA44
SC16C2550BIA44	9352 744 07518	SC16C2550BIA44,518	SC16C2550BIA44

SC16C2550BIA44 技术支持

档案名称	标题	类型	格式
SC16C2550BIA44	5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs	Data sheet	pdf
AN10115	Philips Microcontrollers in LIN Applications	Application note	pdf
AN00093	SC16C2550B 5 V, 3.3 V and 2.5 V dual UART, 5 Mbit/s (max.), with 16-byte FIFOs	Application note	pdf
AN00094	TJA1041/1041A high speed CAN transceiver	Application note	pdf
AN00020	TJA1050 high speed CAN transceiver	Application note	pdf
AN10211	TJA1040 high speed CAN transceiver	Application note	pdf
AN96116	PCA82C250/251 CAN Transceiver	Application note	pdf
PCA82C250_251_TJA1040_TJA1050	Upgrading Note PCA82C250/251 -> TJA1040, TJA1050	Other type	pdf