SC16C750BIB64 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs

The SC16C750B is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbit/s.

The SC16C750B is pin compatible with the TL16C750 and it will power-up to be functionally equivalent to the 16C450. Programming of control registers enables the added features of the SC16C750B. Some of these added features are the 64-byte receive and transmit FIFOs, automatic hardware flow control. The selectable auto-flow control feature significantly reduces software overload and increases system efficiency while in FIFO mode by automatically controlling serial data flow using RTS output and CTS input signals. The SC16C750B also provides DMA mode data transfers through FIFO trigger levels and the TXRDY and RXRDY signals. On-board status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.

The SC16C750B operates at 5 V, 3.3 V and 2.5 V, the industrial temperature range and is available in plastic PLCC44, LQFP64, and HVQFN32 packages

产品特点 Features

Single channel
5 V, 3.3 V and 2.5 V operation
5 V tolerant on input only pins
Industrial temperature range (-40 Cel to +85 Cel)
After reset, all registers are identical to the typical 16C450 register set
Capable of running with all existing generic 16C450 software
Pin compatibility with the industry-standard ST16C450/550, TL16C450/550, PC16C450/550. Software compatible with SC16C750 and TL16C750
Up to 3 Mbit/s transmit/receive operation at 5 V, 2 Mbit/s at 3.3 V, and 1 Mbit/s at 2.5 V
64-byte transmit FIFO
64-byte receive FIFO with error flags
Programmable auto-RTS and auto-CTS
- In auto-CTS mode, CTS controls transmitter
- In auto-RTS mode, receive FIFO contents and threshold control RTS
Automatic hardware flow control
Software selectable baud rate generator
Four selectable Receive interrupt trigger levels
Standard modem interface
Sleep mode
Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun Break)
Independent receiver clock input
Transmit, Receive, Line Status, and data set interrupts independently controlled
Fully programmable character formatting:
- 5-bit, 6-bit, 7-bit, or 8-bit characters
- Even, odd, or no-parity formats
- 1, 1 1/2, or 2-stop bit
- Baud generation (DC to 3 Mbit/s)
False start-bit detection
Complete status reporting capabilities
3-state output TTL drive capabilities for bidirectional data bus and control bus
Line break generation and detection
Internal diagnostic capabilities:
- Loopback controls for communications link fault isolation
Prioritized interrupt system controls
Modem control functions (CTS, RTS, DSR, DTR, RI, DCD)

封装

型号	订购码 (12NC)	可订购的器件编号	产品状态	封装
SC16C750BIB64	9352 744 03128	SC16C750BIB64,128	量产	LQFP64 (SOT314-2)
SC16C750BIB64	9352 744 03151	SC16C750BIB64,151	量产	LQFP64 (SOT314-2)
SC16C750BIB64	9352 744 03157	SC16C750BIB64,157	量产	LQFP64 (SOT314-2)

订货和供应

型号	订购码 (12NC)	可订购的器件编号	化学成分
SC16C750BIB64	9352 744 03128	SC16C750BIB64,128	SC16C750BIB64
SC16C750BIB64	9352 744 03151	SC16C750BIB64,151	SC16C750BIB64
SC16C750BIB64	9352 744 03157	SC16C750BIB64,157	SC16C750BIB64

SC16C750BIB64 技术支持

档案名称	标题	类型	格式
SC16C750BIB64	5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs	Data sheet	pdf
AN10115	Philips Microcontrollers in LIN Applications	Application note	pdf
AN00093	SC16C550B 5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs	Application note	pdf
AN00094	TJA1041/1041A high speed CAN transceiver	Application note	pdf
AN00020	TJA1050 high speed CAN transceiver	Application note	pdf
AN10211	TJA1040 high speed CAN transceiver	Application note	pdf
AN96116	PCA82C250/251 CAN Transceiver	Application note	pdf
PCA82C250_251_TJA1040_TJA1050	Upgrading Note PCA82C250/251 -> TJA1040, TJA1050	Other type	pdf