SC16C752BIB48 5 V, 2.2 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs

The SC16C752B is a dual Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFOs, automatic hardware/software flow control, and data rates up to 5 Mbit/s (3.3 V and 5 V). The SC16C752B offers enhanced features. It has a Transmission Control Register (TCR) that stores receiver FIFO threshold levels to start/stop transmission during hardware and software flow control. With the FIFO Rdy register, the software gets the status of TXRDYn/RXRDYn for all four ports in one access. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loopback capability allows on-board diagnostics.

The UART transmits data, sent to it over the peripheral 8-bit bus, on the TXn signal and receives characters on the RXn signal. Characters can be programmed to be 5 bits, 6 bits, 7 bits, or 8 bits. The UART has a 64-byte receive FIFO and transmit FIFO and can be programmed to interrupt at different trigger levels. The UART generates its own desired baud rate based upon a programmable divisor and its input clock. It can transmit even, odd, or no parity and 1, 1.5, or 2 stop bits. The receiver can detect break, idle, or framing errors, FIFO overflow, and parity errors. The transmitter can detect FIFO underflow. The UART also contains a software interface for modem control operations, and has software flow control and hardware flow control capabilities.

The SC16C752B is available in plastic LQFP48 and HVQFN32 packages

产品特点 Features

Pin compatible with SC16C2550 with additional enhancements
Up to 5 Mbit/s baud rate (at 3.3 V and 5 V; at 2.5 V maximum baud rate is 3 Mbit/s)
64-byte transmit FIFO
64-byte receive FIFO with error flags
Programmable and selectable transmit and receive FIFO trigger levels for DMA and interrupt generation
Software/hardware flow control
- Programmable Xon/Xoff characters
- Programmable auto-RTS and auto-CTS
Optional data flow resume by Xon any character
DMA signalling capability for both received and transmitted data
Supports 5 V, 3.3 V and 2.5 V operation
5 V tolerant on input only pins1
Software selectable baud rate generator
Prescaler provides additional divide-by-4 function
Industrial temperature range (–40 ℃ to +85 ℃)
Pin and software compatible with SC16C752, TL16C752
Fast data bus access time
Programmable Sleep mode
Programmable serial interface characteristics
- 5-bit, 6-bit, 7-bit, or 8-bit characters
- Even, odd, or no parity bit generation and detection
- 1, 1.5, or 2 stop bit generation
False start bit detection
Complete status reporting capabilities in both normal and Sleep mode
Line break generation and detection
Internal test and loopback capabilities
Fully prioritized interrupt system controls
Modem control functions (CTS, RTS, DSR, DTR, RI, and CD)

封装

型号	订购码 (12NC)	可订购的器件编号	产品状态	封装
SC16C752BIB48	9352 744 11128	SC16C752BIB48,128	量产	LQFP48 (SOT313-2)
SC16C752BIB48	9352 744 11157	SC16C752BIB48,157	量产	LQFP48 (SOT313-2)
SC16C752BIB48	9352 744 11151	SC16C752BIB48,151	量产	LQFP48 (SOT313-2)

订货和供应

型号	订购码 (12NC)	可订购的器件编号	化学成分
SC16C752BIB48	9352 744 11128	SC16C752BIB48,128	SC16C752BIB48
SC16C752BIB48	9352 744 11157	SC16C752BIB48,157	SC16C752BIB48
SC16C752BIB48	9352 744 11151	SC16C752BIB48,151	SC16C752BIB48

SC16C752BIB48 技术支持

档案名称	标题	类型	格式
SC16C752BIB48	5 V, 2.2 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs	Data sheet	pdf
AN10115	Philips Microcontrollers in LIN Applications	Application note	pdf
AN00093	SC16C550B 5 V, 2.2 V and 2.5 V dual UART, 5 Mbit/s (max.), with 64-byte FIFOs	Application note	pdf
AN00094	TJA1041/1041A high speed CAN transceiver	Application note	pdf
AN00020	TJA1050 high speed CAN transceiver	Application note	pdf
AN10211	TJA1040 high speed CAN transceiver	Application note	pdf
AN96116	PCA82C250/251 CAN Transceiver	Application note	pdf
PCA82C250_251_TJA1040_TJA1050	Upgrading Note PCA82C250/251 -> TJA1040, TJA1050	Other type	pdf