SC18IS602BIPW I2C-bus to SPI bridge
The SC18IS602B is designed to serve as an interface between a standard I²C-bus of a microcontroller and an SPI bus. This allows the microcontroller to communicate directly with SPI devices through its I²C-bus. The SC18IS602B operates as an I²C-bus slave-transmitter or slave-receiver and an SPI master. The SC18IS602B controls all the SPI bus-specific sequences, protocol, and timing. The SC18IS602B has its own internal oscillator, and it supports four SPI chip select outputs that may be configured as GPIO when not used.
产品特点 Features
- I²C-bus slave interface operating up to 400 kHz
- SPI master operating up to 1.8 Mbit/s
- 200-byte data buffer
- Up to four slave select outputs
- Up to four programmable I/O pins
- Operating supply voltage: 2.4 V to 3.6 V
- Low power mode
- Internal oscillator option
- Active LOW interrupt output
- ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101
- Latch-up testing is done to JEDEC Standard JESD78 that exceeds 100 mA
- Very small 16-pin TSSOP
|
应用
- Converting I²C-bus to SPI
- Adding additional SPI bus controllers to an existing system
产品实物图
|
封装
| 型号 |
可订购的器件编号 |
订购码 (12NC) |
产品状态 |
封装 |
| SC18IS602BIPW |
9352 861 82128 |
SC18IS602BIPW,128 |
量产 |
TSSOP16
(SOT403-1) |
| SC18IS602BIPW |
9352 861 82112 |
SC18IS602BIPW,112 |
量产 |
TSSOP16
(SOT403-1) |
订货和供应
| 型号 |
订购码 (12NC) |
可订购的器件编号 |
化学成分 |
| SC18IS602BIPW |
9352 861 82128 |
SC18IS602BIPW,128 |
SC18IS602BIPW |
| SC18IS602BIPW |
9352 861 82112 |
SC18IS602BIPW,112 |
SC18IS602BIPW |
SC18IS602BIPW 技术支持
| 档案名称 |
标题 |
类型 |
格式 |
| SC18IS602BIPW |
I2C-bus to SPI bridge |
Data sheet |
pdf |
| AN10587 |
Interfacing NXP bridge IC with NXP ARM microcontroller
|
Application note |
pdf |
| AN10417 |
SC16IS760/762 Fast IrDA mode
|
Application note |
pdf |
| AN10428 |
UART-SPI Gateway for Philips SPI slave bridges
|
Application note |
pdf |
| AN10462 |
SPI programming for Philips Bridge ICs
|
Application note |
pdf |
| AN10485 |
SDA pin connection in SPI mode
|
Application note |
pdf |
| AN10486 |
Automatic RS-485 address detection
|
Application note |
pdf |
| AN10571 |
Sleep programming for NXP bridge ICs
|
Application note |
pdf |
| AN10452 |
Interfacing Philips Bridge IC with Philips microcontroller
|
Application note |
pdf |
| 75015676 |
Low-power bridges for I2C or SPI to UART or IrDA or GPIO; NXP low-power bridges SC16IS750/52/60/62
|
Leaflet |
pdf |
