TJA1022T Dual LIN 2.2A/SAE J2602 transceiver

The TJA1022 is a dual LIN transceiver that provides the interface between a Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle subnetworks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. The TJA1022 is pin compatible with the TJA1020, TJA1021 and TJA1027. The TJA1022 and TJA1027 are also software compatible.

The transmit data streams generated by the protocol controller are converted by the TJA1022 into optimized bus signals shaped to minimize ElectroMagnetic Emissions (EME). The LIN bus output pins are pulled HIGH via internal termination resistors. For a master application, an external resistor in series with a diode should be connected between pin VBAT and each of the LIN pins. The receivers detect receive data streams on the LIN bus input pins and transfer them via pins RXD1 and RXD2 to the microcontroller.

Power consumption is very low when both transceivers are in Sleep mode. However, the TJA1022 can still be woken up via pins LIN1/LIN2 and SLP1_N/SLP2_N

产品特点 Features

General

Two LIN transceivers in a single package
LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602 compliant
Baud rate up to 20 kBd
Very low ElectroMagnetic Emissions (EME)
Very low current consumption in Sleep mode with remote LIN wake-up
Input levels compatible with 3.3 V and 5 V devices
Integrated termination resistors for LIN slave applications
Passive behavior in unpowered state
Operational during cranking pulse: full operation from 5 V upwards
Undervoltage detection
K-line compatible
Available in SO14 and HVSON14 packages
Leadless HVSON14 package (3.0 mm × 4.5 mm) with improved Automated Optical Inspection (AOI) capability
Dark green product (halogen free and Restriction of Hazardous Substances (RoHS) compliant)
Pin-compatible with the TJA1020, TJA1021 and TJA1027
Software-compatible with the TJA1027

Protection

Very high ElectroMagnetic Immunity (EMI)
Very high ESD robustness: ±8 kV according to IEC 61000-4-2 for pins LIN1, LIN2 and VBAT
Bus terminal and battery pin protected against transients in the automotive environment (ISO 7637)
Bus terminal short-circuit proof to battery and ground
Thermally protected
Initial TXD dominant check when switching to Normal mode
TXD dominant time-out function

封装

型号	订购码 (12NC)	可订购的器件编号	产品状态	封装
TJA1022T	9352 971 05118	TJA1022T,118	量产	SO14 (SOT108-1)

订货和供应

型号	订购码 (12NC)	可订购的器件编号	化学成分
TJA1022T	9352 971 05118	TJA1022T,118	TJA1022T

TJA1022T 技术支持

档案名称	标题	类型	格式
TJA1022T	Dual LIN 2.2A/SAE J2602 transceiver	Data sheet	pdf
AN10115	Philips Microcontrollers in LIN Applications	Application note	pdf
AN00093	TJA1022 Dual LIN 2.2A/SAE J2602 transceiver	Application note	pdf
AN00094	TJA1041/1041A high speed CAN transceiver	Application note	pdf
AN00020	TJA1050 high speed CAN transceiver	Application note	pdf
AN10211	TJA1040 high speed CAN transceiver	Application note	pdf
AN96116	PCA82C250/251 CAN Transceiver	Application note	pdf
PCA82C250_251_TJA1040_TJA1050	Upgrading Note PCA82C250/251 -> TJA1040, TJA1050	Other type	pdf