The TJA1027 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle sub-networks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. The TJA1027 is pin-compatible with the TJA1020 and the TJA1021.
The transmit data stream generated by the protocol controller is converted by the TJA1027 into an optimized bus signal shaped to minimize ElectroMagnetic Emissions (EME). The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application, an external resistor in series with a diode should be connected between pin VBAT and pin LIN. The receiver detects a receive data stream on the LIN bus input pin and transfers it via pin RXD to the microcontroller.
Power consumption is very low in Sleep mode. However, the TJA1027 can still be woken up via pins LIN and SLP_N
General
Protection
型号 | 订购码 (12NC) | 可订购的器件编号 | 产品状态 | 封装 |
TJA1027TK/20 | 9352 942 12118 | TJA1027TK/20,118 | 量产 | HVSON8 (SOT782-1) |
型号 | 订购码 (12NC) | 可订购的器件编号 | 化学成分 |
TJA1027TK/20 | 9352 942 12118 | TJA1027TK/20,118 | TJA1027TK/20 |
档案名称 | 标题 | 类型 | 格式 |
TJA1027TK | LIN 2.2A/SAE J2602 transceiver | Data sheet | |
AN10115 | Philips Microcontrollers in LIN Applications | Application note | |
AN00093 | TJA1027 LIN 2.2A/SAE J2602 transceiver | Application note | |
AN00094 | TJA1041/1041A high speed CAN transceiver | Application note | |
AN00020 | TJA1050 high speed CAN transceiver | Application note | |
AN10211 | TJA1040 high speed CAN transceiver | Application note | |
AN96116 | PCA82C250/251 CAN Transceiver | Application note | |
PCA82C250_251_TJA1040_TJA1050 | Upgrading Note PCA82C250/251 -> TJA1040, TJA1050 | Other type |