The TJA1029 is the interface between the Local Interconnect Network (LIN) master/slave protocol controller and the physical bus in a LIN network. It is primarily intended for in-vehicle subnetworks using baud rates up to 20 kBd and is compliant with LIN 2.0, LIN 2.1, LIN 2.2, LIN 2.2A and SAE J2602. The TJA1029 is pin-compatible with the TJA1020, TJA1021, TJA1022 and TJA1027.
The protocol controller generates the transmit data stream. The TJA1029 converts the data stream into an optimized bus signal shaped to minimize ElectroMagnetic Emissions (EME). The LIN bus output pin is pulled HIGH via an internal termination resistor. For a master application, connect an external resistor in series with a diode between pin VBAT and pin LIN. The receiver detects a receive data stream on the LIN bus input pin and transfers it via pin RXD to the microcontroller.
Power consumption is very low in Sleep mode. However, the TJA1029 can still be woken up via pins LIN and SLP_N. An integrated TXD dominant time-out function prevents the bus being driven to a permanent dominant state
General
Protection
型号 | 订购码 (12NC) | 可订购的器件编号 | 产品状态 | 封装 |
TJA1029TK | 9352 979 63118 | TJA1029TK,118 | 量产 | HVSON8 (SOT782-1) |
型号 | 订购码 (12NC) | 可订购的器件编号 | 化学成分 |
TJA1029TK | 9352 979 63118 | TJA1029TK,118 | TJA1029TK |
档案名称 | 标题 | 类型 | 格式 |
TJA1029TK | LIN 2.2A/SAE J2602 transceiver with TXD dominant timeout | Data sheet | |
AN10115 | Philips Microcontrollers in LIN Applications | Application note | |
AN00094 | TJA1041/1041A high speed CAN transceiver | Application note | |
AN00020 | TJA1050 high speed CAN transceiver | Application note | |
AN10211 | TJA1040 high speed CAN transceiver | Application note | |
AN96116 | PCA82C250/251 CAN Transceiver | Application note | |
PCA82C250_251_TJA1040_TJA1050 | Upgrading Note PCA82C250/251 -> TJA1040, TJA1050 | Other type |