TJA1085HN FlexRay active star coupler
The TJA1085 is a FlexRay active star coupler that can connect up to 4 branches of a FlexRay network. The TJA1085 is compliant with the FlexRay electrical physical layer specification V3.0.1.
Several TJA1085 devices can be connected via their TRXD0/1 interfaces to increase the number of branches in the network. A dedicated Communication Controller (CC) interface allows for integration into an ECU. The TJA1085 supports low-power management by offering bus wake-up capability along with battery supply and voltage regulator control. The TJA1085 meets industry standards for EMC/ESD performance and provides enhanced bus error detection, low current consumption and unmatched asymmetric delay performance.
The TJA1085 also fulfills the JASPAR requirements as defined by the Japanese car industry
产品特点 Features
General
- Compliant with FlexRay Electrical Physical Layer specification V3.0.1
- Fulfills JASPAR requirements
- Automotive product qualification in accordance with AEC-Q100
- Data transfer rates from 2.5 Mbit/s to 10 Mbit/s
- Supports 60 ns minimum bit time at 400 mV differential voltage
- Low-power management for battery-supplied ECUs
- Very low current consumption in AS_Sleep mode
- Leadless HVQFN44 package with improved Automated Optical Inspection (AOI) capability
Functional
- Supports autonomous active star operation independent of the host ensuring the TJA1085 remains active even if the host fails or is switched off
- Branches can be independently configured
- Branch extension via TRXD0/1 inner star interface
- 16-bit bidirectional SPI interface up to 2 Mbit/s for host communication
- Full host control over branch status
- Enhanced wake-up capability:
- Remote wake-up via wake-up pattern and dedicated FlexRay data frames
- Local wake-up via pin LWU
- Wake-up source recognition
- Configurable per branch
- Enhanced supply voltage monitoring on VIO, VCC, VBUF and VBAT
- Auto I/O level adaptation to host controller supply voltage VIO
- Can be used in 14 V, 24 V and 48 V powered systems
- Enhanced bus error detection - detects short-circuit conditions on the bus
- Instant transmitter shut-down interface (BGE pin)
- Selective branch shut-down (partial networking)
Robustness
- Bus pins protected against ±8 kV ESD pulses according to HBM and ±6 kV ESD pulses according to IEC61000-4-2
- All pins protected against ±1000 V ESD according to CDM
- All pins protected against ±200 V ESD according to MM
- No reverse currents from the digital input pins to VIO or VCC when the TJA1085 is not powered up
- Bus pins short-circuit proof to battery voltage (14 V, 24 V or 48 V) and ground
- Overtemperature detection and protection
- Bus pins protected against transients in automotive environment (according to ISO 7637 class C)
Active star functional classes
- Active star - communication controller interface
- Active star - bus guardian interface
- Active star - voltage regulator control
- Active star - logic level adaptation
- Active star - host interface
- Active star - increased voltage amplitude transmitter
封装
| 型号 |
订购码 (12NC) |
可订购的器件编号 |
产品状态 |
封装 |
| TJA1085HN |
9352 880 82118 |
TJA1085HN,118 |
量产 |
HVQFN44
(SOT1113-1) |
订货和供应
| 型号 |
订购码 (12NC) |
可订购的器件编号 |
化学成分 |
| TJA1085HN |
9352 880 82118 |
TJA1085HN,118 |
TJA1085HN |
TJA1085HN 技术支持
| 档案名称 |
标题 |
类型 |
格式 |
| TJA1085HN |
FlexRay active star coupler |
Data sheet |
pdf |
| AN10115 |
Philips Microcontrollers in LIN Applications
|
Application note |
pdf |
| AN00094 |
TJA1041/1041A high speed CAN transceiver
|
Application note |
pdf |
| AN00020 |
TJA1050 high speed CAN transceiver
|
Application note |
pdf |
| AN10211 |
TJA1040 high speed CAN transceiver
|
Application note |
pdf |
| AN96116 |
PCA82C250/251 CAN Transceiver
|
Application note |
pdf |
| PCA82C250_251_TJA1040_TJA1050 |
Upgrading Note PCA82C250/251 -> TJA1040, TJA1050
|
Other type |
pdf |
