UJA1065TW High-speed CAN/LIN fail-safe system basis chip
The UJA1065 fail-safe System Basis Chip (SBC) replaces basic discrete components that are common in every Electronic Control Unit (ECU) with a Controller Area Network (CAN) and a Local Interconnect Network (LIN) interface. The fail-safe SBC supports all networking applications that control various power and sensor peripherals by using high-speed CAN as the main network interface and LIN as a local sub-bus. The fail-safe SBC contains the following integrated devices:
- High-speed CAN transceiver, interoperable and downward compatible with CAN transceivers TJA1041 and TJA1041A, and compatible with the ISO 11898-2 standard and the ISO 11898-5 standard (in preparation)
- LIN transceiver compliant with LIN 2.0 and SAE J2602, and compatible with LIN 1.3
- Advanced independent watchdog
- Dedicated voltage regulators for microcontroller and CAN transceiver
- Serial peripheral interface (full duplex)
- Local wake-up input port
- Inhibit/limp-home output port
In addition to the advantages of integrating these common ECU functions in a single package, the fail-safe SBC offers an intelligent combination of system-specific functions such as:
- Advanced low-power concept
- Safe and controlled system start-up behavior
- Advanced fail-safe system behavior that prevents any conceivable deadlock
- Detailed status reporting on system and subsystem levels
The UJA1065 is designed to be used in combination with a microcontroller that incorporates a CAN controller. The fail-safe SBC ensures that the microcontroller is always started up in a defined manner. In failure situations, the fail-safe SBC will maintain microcontroller functionality for as long as possible to provide full monitoring and a software-driven fall-back operation.
The UJA1065 is designed for 14 V single power supply architectures and for 14 V and 42 V dual power supply architectures
产品特点 Features
2.1 General
- Contains a full set of CAN and LIN ECU functions:
- CAN transceiver and LIN transceiver
- Voltage regulator for the microcontroller (3.3 V or 5.0 V)
- Separate voltage regulator for the CAN transceiver (5 V)
- Enhanced window watchdog with on-chip oscillator
- Serial Peripheral Interface (SPI) for the microcontroller
- ECU power management system
- Fully integrated autonomous fail-safe system
- Designed for automotive applications:
- Supports 14 V and 42 V architectures
- Excellent ElectroMagnetic Compatibility (EMC) performance
- ±8 kV ElectroStatic Discharge (ESD) protection Human Body Model (HBM) for off-board pins
- ±4 kV ElectroStatic Discharge (ESD) protection IEC 61000-4-2 for off-board pins
- ±60 V short-circuit proof CAN/LIN-bus pins
- Battery and CAN/LIN-bus pins are protected against transients in accordance with ISO 7637-3
- Very low sleep current
- Supports remote flash programming via the CAN-bus
- Small 6.1 mm × 11 mm HTSSOP32 package with low thermal resistance
2.2 CAN transceiver
- ISO 11898-2 and ISO 11898-5 compliant high-speed CAN transceiver
- Enhanced error signalling and reporting
- Dedicated low dropout voltage regulator for the CAN-bus:
- Independent from microcontroller supply
- Guarded by CAN-bus failure management
- Significantly improves EMC performance
- Partial networking option with global wake-up feature, allows selective CAN-bus communication without waking up sleeping nodes
- Bus connections are truly floating when power is off
- SPLIT output pin for stabilizing the recessive bus level
2.3 LIN transceiver
- LIN 2.0 compliant LIN transceiver
- Enhanced error signalling and reporting
- Downward compatible with LIN 1.3 and the TJA1020
2.4 Power management
- Smart operating modes and power management modes
- Cyclic wake-up capability in Standby and Sleep mode
- Local wake-up input with cyclic supply feature
- Remote wake-up capability via the CAN-bus and LIN-bus
- External voltage regulators can easily be incorporated in the power supply system (flexible and fail-safe)
- 42 V battery-related high-side switch for driving external loads such as relays and wake-up switches
- Intelligent maskable interrupt output
2.5 Fail-safe features
- Safe and predictable behavior under all conditions
- Programmable fail-safe coded window and time-out watchdog with on-chip oscillator, guaranteeing autonomous fail-safe system supervision
- Fail-safe coded 16-bit SPI interface for the microcontroller
- Global enable pin for the control of safety-critical hardware
- Detection and detailed reporting of failures:
- On-chip oscillator failure and watchdog alerts
- Battery and voltage regulator undervoltages
- CAN and LIN-bus failures (short-circuits and open-circuit bus wires)
- TXD and RXD clamping situations and short-circuits
- Clamped or open reset line
- SPI message errors
- Overtemperature warning
- ECU ground shift (two selectable thresholds)
- Rigorous error handling based on diagnostics
- Supply failure early warning allows critical data to be stored
- 23 bits of access-protected RAM is available e.g. for logging of cyclic problems
- Reporting in a single SPI message; no assembly of multiple SPI frames needed
- Limp-home output signal for activating application hardware in case system enters Fail-safe mode (e.g. for switching on warning lights)
- Fail-safe coded activation of Software development mode and Flash mode
- Unique SPI readable device type identification
- Software-initiated system reset
封装
| 型号 |
订购码 (12NC) |
可订购的器件编号 |
产品状态 |
封装 |
| UJA1065TW/3V3/C/T |
9352 888 67518 |
UJA1065TW/3V3/C/T, |
量产 |
HTSSOP32
(SOT549-1) |
| UJA1065TW/3V3/C/T |
9352 888 67512 |
UJA1065TW/3V3:512 |
量产 |
HTSSOP32
(SOT549-1) |
| UJA1065TW/5V0/C/T |
9352 888 68518 |
UJA1065TW/5V0/C/T, |
量产 |
HTSSOP32
(SOT549-1) |
| UJA1065TW/5V0/C/T |
9352 888 68512 |
UJA1065TW/5V0/512 |
量产 |
HTSSOP32
(SOT549-1) |
订货和供应
| 型号 |
订购码 (12NC) |
可订购的器件编号 |
化学成分 |
| UJA1065TW/3V3/C/T |
9352 888 67518 |
UJA1065TW/3V3/C/T, |
UJA1065TW/3V3/C/T |
| UJA1065TW/3V3/C/T |
9352 888 67512 |
UJA1065TW/3V3:512 |
UJA1065TW/3V3/C/T |
| UJA1065TW/5V0/C/T |
9352 888 68518 |
UJA1065TW/5V0/C/T, |
UJA1065TW/5V0/C/T |
| UJA1065TW/5V0/C/T |
9352 888 68512 |
UJA1065TW/5V0/512 |
UJA1065TW/5V0/C/T |
UJA1065TW 技术支持
| 档案名称 |
标题 |
类型 |
格式 |
| UJA1065TW |
High-speed CAN/LIN fail-safe system basis chip |
Data sheet |
pdf |
| AN10115 |
Philips Microcontrollers in LIN Applications
|
Application note |
pdf |
| AN00094 |
TJA1041/1041A high speed CAN transceiver
|
Application note |
pdf |
| AN00020 |
TJA1050 high speed CAN transceiver
|
Application note |
pdf |
| AN10211 |
TJA1040 high speed CAN transceiver
|
Application note |
pdf |
| AN96116 |
PCA82C250/251 CAN Transceiver
|
Application note |
pdf |
| PCA82C250_251_TJA1040_TJA1050 |
Upgrading Note PCA82C250/251 -> TJA1040, TJA1050
|
Other type |
pdf |
