The 74VHC374 is an advanced high-speed CMOS OCTAL D-TYPE FLIP FLOP with 3 STATE OUTPUTS NON INVERTING fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.
These 8 bit D-Type latch are controlled by a clock input (CK) and an output enable input (OE).
On the positive transition of the clock, the Q outputs will be set to the logic state that were setup at the D inputs.
While the (OE) input is low, the 8 outputs will be in a normal logic state (high or low logic level) and while high level the outputs will be in a high impedance state.
The Output control does not affect the internal operation of flip flops; that is, the old data can be retained or the new data can be entered even while the outputs are off. Power down protection is provided on all inputs and 0 to 7V can be accepted on inputs with no regard to the supply voltage. This device can be used to interface 5V to 3V.
All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage
| 订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
| 74VHC374MTR | Active | 1000 | SO-20 | Tape And Reel | 74VHC374MTR | ||
| 74VHC374TTR | Active | 1000 | TSSOP 20 | Tape And Reel | 74VHC374TTR |
| 描述 | 版本 | 大小 |
| 74VHC374 : Octal D-type flip flop with 3 state outputs non inverting | 4 | 323KB |
