L5986 2.5 A step-down switching regulator
The L5986 is a step-down switching regulator with a 3.0 A (min.) current limited embedded power MOSFET, so it is able to deliver up to 2.5 A current to the load depending on the application conditions.
The input voltage can range from 2.9 V to 18 V, while the output voltage can be set starting from 0.6 V to VIN. Having a minimum input voltage of 2.9 V, the device is suitable also for 3.3 V bus.
Requiring a minimum set of external components, the device includes an internal 250 kHz switching frequency oscillator that can be externally adjusted up to 1 MHz.
The QFN and the HSOP packages with exposed pad allow reducing the RthJAdown to 60 °C/W and 40 °C/W respectively
技术特性
- 2.5 A DC output current
- 2.9 V to 18 V input voltage
- Output voltage adjustable from 0.6 V
- 250 kHz switching frequency, programmable up to 1 MHz
- Internal soft-start and inhibit
- Low dropout operation: 100 % duty cycle
- Voltage feed-forward
- Zero load current operation
- Overcurrent and thermal protection
- VFQFPN3x3-8L and HSOP8 package
|
功能框图
 |
L5986 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| L5986TR |
Active |
|
1000 |
VDFPN 8 3x3x1.0 |
Tape And Reel |
|
|
| L5986ATR |
Active |
|
1000 |
PowerSO-8 |
Tape And Reel |
|
|
| L5986 |
Active |
|
1000 |
VDFPN 8 3x3x1.0 |
Tube |
|
|
| L5986A |
Active |
|
1000 |
PowerSO-8 |
Tube |
|
|
DATASHEET
| 描述 |
版本 |
大小 |
| L5986 : 2.5 A step-down switching regulator |
4 |
1357KB |
DESIGN NOTES
| 描述 |
版本 |
大小 |
| DN0011: ST1S03 alternative topology: Using a buck in a negative buck-boost configuration |
1.0 |
360KB |
BOARDS AND TOOLS
| 型号 |
描述 |
| EVAL5986A |
2.5 A step-down switching regulator demonstration board based on the L5986, L5986A |
| EVAL5986 |
2.5 A step-down switching regulator demonstration board based on the L5986, L5986A |
