L6562A Transition-mode PFC controller BCD technology
The L6562A is a current-mode PFC controller operating in Transition Mode (TM). Coming with the same pin-out as its predecessors L6561 and L6562, it offers improved performance.
The highly linear multiplier includes a special circuit, able to reduce AC input current distortion, that allows wide-range-mains operation with an extremely low THD, even over a large load range.
The output voltage is controlled by means of a voltage-mode error amplifier and an accurate (1% @TJ = 25°C) internal voltage reference.
The device features extremely low consumption (60µA max. before start-up and <5 mA operating) and includes a disable function suitable for IC remote ON/OFF, which makes it easier to comply with energy saving requirements (Blue Angel, EnergyStar, Energy2000, etc.).
An effective two-step OVP enables to safely handle overvoltages either occurring at start-up or resulting from load disconnection.
The totem-pole output stage, capable of 600 mA source and 800 mA sink current, is suitable to drive high current MOSFETs or IGBTs. This, combined with the other features and the possibility to operate with the proprietary Fixed-Off-Time control, makes the device an excellent low-cost solution for EN61000-3-2 compliant SMPS in excess of 350W
技术特性
- Proprietary multiplier design for minimum THD
- Very accurate adjustable output overvoltage protection
- Ultra-low (30µA) Start-up current
- Low (2.5mA) quiescent current
- Digital leading-edge blanking on current sense
- Disable function on E/A input
- 1% (@ TJ = 25°C) internal reference voltage
- -600/+800mA totem pole gate driver with active pull-down during UVLO and voltage clamp
- DIP-8/SO-8 packages
|
功能框图
|
L6562A 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
L6562AD |
Active |
|
1000 |
SO-8 |
Tube |
|
|
L6562AN |
Active |
|
1000 |
DIP-8 |
Tube |
|
|
L6562ADTR |
Active |
|
1000 |
SO-8 |
Tape And Reel |
|
|
DATASHEET
描述 |
版本 |
大小 |
L6562A : Transition-mode PFC controller |
3 |
558KB |
APPLICATION NOTES
描述 |
版本 |
大小 |
AN3424: STEVAL-ILL042V1: high power factor flyback LED driver based on the L6562A and TSM101 |
1 |
2299KB |
AN3159: STEVAL-ILH005V2: 150 W HID electronic ballast |
1 |
1864KB |
AN2761: Solution for designing a transition mode PFC preregulator with the L6562A |
2 |
526KB |
AN2782: Solution for designing a 400 W fixed-off-time controlled PFC preregulator with the L6562A |
2 |
1616KB |
AN2928: Modified buck converter for LED applications |
1 |
220KB |
AN3256: Low-cost LED driver for an A19 lamp |
1 |
940KB |
AN3973: Electronic ballast with active PFC using STD3N62K3 power MOSFET and STD845DN40 BJT device |
1 |
3396KB |
AN2983: Constant current inverse buck LED driver using L6562A |
1 |
1949KB |
AN2835: 70 W HID lamp ballast based on the L6569, L6385E and L6562A |
1 |
795KB |
AN2755: 400 W FOT-controlled PFC pre-regulator with the L6562A |
1 |
716KB |
AN2838: 35 W wide-range high power factor flyback converter demonstration board using the L6562A |
1 |
2065KB |
AN3111: 18 W single-stage offline LED driver |
2 |
799KB |
AN2711: 120 VAC input-Triac dimmable LED driver based on the L6562A |
3 |
1316KB |
USER MANUALS
描述 |
版本 |
大小 |
UM0670: 80 W offline LED driver with PFC |
2 |
1870KB |
PRODUCT PRESENTATIONS
BOARDS AND TOOLS
型号 |
描述 |
STEVAL-ILL027V2 |
18 W single-stage offline LED driver based on the L6562A (European version) |
EVL6562A-TM-80W |
80 W high performance transition mode PFC evaluation board |
EVL6562A-LED |
Constant current inverse buck LED driver using L6562A |
STEVAL-ILL013V1 |
80 W offline PFC and LED driver demonstration board with dimming based on the L6562A |
STEVAL-ILL043V1 |
High end, 75 W high power factor flyback LED driver based on the L6562A with two dimmable strings |
STEVAL-ILL016V2 |
New 15 W offline TRIAC dimmable LED driver based on L6562AD and TSM1052 (USA Market - 115 V) |
STEVAL-ILL019V1 |
35 W offline LED driver for 4 channels HB RGGB LED based on L6562A |
STEVAL-ILL034V1 |
LED driver for an A19 lamp based on the L6562A for USA market |
EVL6562A-400W |
L6562A 400W FOT-controlled PFC pre-regulator evaluation board |