The device is a current-mode PFC controller operating in Transition Mode (TM). Based on the core of a standard TM PFC controller, it offers improved performance and additional functions.
The highly linear multiplier, along with a special correction circuit that reduces crossover distortion of the mains current, allows wide-range-mains operation with an extremely low THD even over a large load range.
The output voltage is controlled by means of a voltage-mode error amplifier and a precise (1.5% @TJ = 25°C) internal voltage reference. The stability of the loop and the transient response to sudden mains voltage changes are improved by the voltage feedforward function (1/V2 correction).
Additionally, the IC provides the option for tracking boost operation (where the output voltage is changed tracking the mains voltage). The device features extremely low consumption (≤ 90 µA before start-up and ≤ 5 mA running).
In addition to an effective two-step OVP that handles normal operation overvoltages, the IC provides also a protection against feedback loop failures or erroneous output voltage setting.
In the L6563 a protection is added to stop the PFC stage in case the boost inductor saturates. This function is not included in the L6563A. This is the only difference between the two part numbers.
An interface with the PWM controller of the DC-DC converter supplied by the PFC preregulator is provided: the purpose is to stop the operation of the converter in case of anomalous conditions for the PFC stage (feedback loop failure, boost inductor's core saturation) in the L6563 only and to disable the PFC stage in case of light load for the DC-DC converter, so as to make it easier to comply with energy saving norms (Blue Angel, EnergyStar, Energy2000, etc.). The device includes disable functions suitable for remote ON/OFF control both in systems where the PFC pre-regulator works as a master and in those where it works as a slave.
The totem-pole output stage, capable of 600 mA source and 800 mA sink current, is suitable to drive high current MOSFETs or IGBTs. This, combined with the other features and the possibility to operate with the proprietary Fixed-Off-Time control, makes the device an excellent low-cost solution for EN61000-3-2 compliant SMPS in excess of 350W
技术特性
|
功能框图 |
订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
L6563 | NRND | 1000 | SO-14 | Tube | |||
L6563TR | NRND | 1000 | SO-14 | Tape And Reel |
描述 | 版本 | 大小 |
L6563 : DS4109: Advanced transition-mode PFC controller | 4 | 688KB |
描述 | 版本 | 大小 |
AN2492: Wide range 400W L6599-based HB LLC resonant converter for PDP application | 3 | 837KB |
AN2509: Wide range 400W (+200 V@1.6 A / +75 V@1 A) L6599-based HB LLC resonant converter | 3 | 1085KB |
AN2393: Reference design: wide range 200W L6599-based HB LLC resonant converter for LCD TV & flat panels | 5 | 667KB |
AN2321: Reference design: high performance, L6599-based HB-LLC adapter with PFC for laptop computers | 2 | 808KB |
AN2331: Reference design: 100W high performance, half bridge LLC multi-resonant SMPS with PFC | 1 | 826KB |
AN2852: EVL6591-90WADP: 90 W AC-DC asymmetrical half-bridge adapter using L6591 and L6563 | 1 | 1497KB |
AN3215: Boost for solar applications with 3 kW fixed off time (FOT) | 1 | 332KB |
AN2485: 400 W FOT-controlled PFC pre-regulator with the L6563 | 1 | 753KB |
AN2951: 3 kW fixed-off-time (FOT) power factor correction | 1 | 1141KB |
AN2521: 19 V - 75 W laptop adapter with tracking boost PFC pre-regulator, using the L6563 and L6668 | 1 | 768KB |
AN2690: 19 V - 75 W adapter with pre-regulator PFC using the L6563 and the L6566A | 1 | 1096KB |
描述 | 版本 | 大小 |
UM0673: STEVAL-ISF001V1, 3 kW FOT PFC board based on the L6563 | 1 | 788KB |
描述 | 版本 | 大小 |
Energy-efficient solutions for offline LED lighting and general illumination | 2.0.0 | 2646KB |
型号 | 描述 |
STEVAL-ISF001V1 | 3 kW fixed off-time PFC based on the L6563 and STW55NM60N |
EVL6566A-75WES4 | 19 V - 75 W SMPS compliant with latest Energy Star criteria using the L6563 and the L6566A |
描述 | 版本 | 大小 |
FLSMPSLED1011 : 48 V, 130 W high-efficiency SMPS for LED street lighting | 1.0.0 | 257KB |