L6563H High voltage start-up transition-mode PFC
The L6563H is a current-mode PFC controller operating in transition mode (TM) which embeds the same features existing in the L6563S with the addition of a high voltage start-up source. These functions make the IC especially suitable for applications that have to be compliant with energy saving regulations and where the PFC pre-regulator works as the master stage.
The highly linear multiplier, along with a special correction circuit that reduces crossover distortion of the mains current, allows wide-range-mains operation with an extremely low THD even over a large load range.
The output voltage is controlled by means of a voltage-mode error amplifier and an accurate (1% @Tj = 25 °C) internal voltage reference. Loop's stability is optimized by the voltage feedforward function (1/V2 correction), which in this IC uses a proprietary technique that considerably improves line transient response as well in case of mains both drops and surges (“bidirectional”).
Additionally, the IC provides the option for tracking boost operation, i.e. the output voltage is changed tracking the mains voltage.
The device includes disable functions suitable for remote ON/OFF control too.
In addition to an over voltage protection able to keep the output voltage under control during transient conditions, the IC is provided also with a protection against feedback loop failures or erroneous settings. Other on-board protection functions allow that brownout conditions and boost inductor saturation can be safely handled.
An interface with the PWM controller of the DC-DC converter supplied by the PFC pre-regulator is provided: the purpose is to stop the operation of the converter in case of anomalous conditions for the PFC stage (feedback loop failure, boost inductor's core saturation, etc.) and to handle the PFC stage in case of light load for the DC-DC converter, to make it easier to comply with energy saving regulations (Blue Angel, EnergyStar, Energy2000, etc.).
The totem-pole output stage, capable of 600 mA source and 800 mA sink current, is suitable for big MOSFET or IGBT drive. This, combined with the other features and the possibility to operate with ST's proprietary fixed-off-time control, makes the device an excellent solution for SMPS up to 400 W that need to be compliant with EN61000-3-2 and JEITA-MITI standards
技术特性
|
功能框图 |
L6563H 订购信息
| 订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
| L6563H | Active | 1000 | SO-14 | Tube | |||
| L6563HTR | Active | 1000 | SO-14 | Tape And Reel |
DATASHEET
| 描述 | 版本 | 大小 |
| L6563H : High voltage start-up transition-mode PFC | 3 | 2185KB |
APPLICATION NOTES
| 描述 | 版本 | 大小 |
| AN3142: Solution for designing a 400 W fixed-off-time controlled PFC preregulator with the L6563S and L6563H | 3 | 799KB |
| AN3027: How to design a transition-mode PFC pre-regulator with the L6563S and L6563H | 4 | 897KB |
| AN3118: 250 W transition-mode PFC pre-regulator with the new L6563H | 2 | 1168KB |
| AN4026: 19 V - 90 W adapter with PFC for laptop computers using the L6563H and L6699 | 1 | 989KB |
| AN3172: 19 V - 90 W adapter with PFC for Laptop computers using the L6563H and L6599A | 1 | 1846KB |
| AN3014: 19 V, 90 W resonant converter with synchronous rectification using the L6563H, L6599A and SRK2000 | 2 | 941KB |
| AN4027: 12 V - 150 W resonant converter with synchronous rectification using the L6563H, L6699 and SRK2000 | 1 | 2337KB |
| AN3233: 12 V - 150 W resonant converter with synchronous rectification using the L6563H, L6599A, and SRK2000 | 1 | 2155KB |
| AN3063: 100 W transition-mode PFC pre-regulator with the L6563H | 3 | 1495KB |
USER MANUALS
| 描述 | 版本 | 大小 |
| UM0673: STEVAL-ISF001V1, 3 kW FOT PFC board based on the L6563H | 1 | 788KB |
PRODUCT PRESENTATIONS
| 描述 | 版本 | 大小 |
| Energy-efficient solutions for offline LED lighting and general illumination | 2.0.0 | 2646KB |
BOARDS AND TOOLS
| 型号 | 描述 |
| EVL6699-90WADP | 19V - 90W Adapter with PFC for Laptop computers using the L6563H and L6699 |
| EVL6699-150W-SR | 12V - 150W resonant converter with synchronous rectification using the L6563H, L6699 and SRK2000 |
| EVL6566A-75WES4 | 19 V - 75 W SMPS compliant with latest Energy Star criteria using the L6563H and the L6566A |
| EVL150W-ADP-SR | 12 V - 150 W resonant converter with synchronous rectification using the L6563H, L6599A, and SRK2000 |
FLYERS
| 描述 | 版本 | 大小 |
| FLSMPSLED1011 : 48 V, 130 W high-efficiency SMPS for LED street lighting | 1.0.0 | 257KB |
