L9733 Octal configurable low/high side driver

The L9733 is a highly flexible monolithic, medium current, output driver that incorporates 8 outputs that can be used as either internal low or high-side drives in any combination.

Outputs 1-8 are self-configuring as high or low-side drives. Self-configuration allows a user to connect a high or low-side load to any of these outputs and the L9733 will drive them correctly as well as provide proper fault mode operation with no other needed inputs. In addition, outputs 6, 7 and 8 can be PWM controlled via a external pins (IN6-8).

This device is capable of switching variable load currents over the ambient range of -40 °C to +125 °C. The outputs are MOSFET drivers to minimize Vdd current requirements. For low-side configured outputs an internal zener clamp from the drain to gate with a breakdown of 50 V minimum will provide fast turn off of inductive loads. When a high-side configured output is commanded Off after having been commanded On, the source voltage will go to (VGND - 15 V).

An 16 bit SPI input is used to command the 8 output drivers either "On" or "Off", reducing the I/O port requirement of the microcontroller. Multiple L9733 can be daisy-chained. In addition the SPI output indicates latched fault conditions that may have occurred.

技术特性
L9733 订购信息
订购型号 产品状态 美金价格 数量 封装 包装形式 温度范围 材料声明
L9733XP Active 2.859 1000 PowerSSO 28 7.5x10.3 Tube   L9733XP
L9733CN Active 2.859 1000 PowerSSO 28 7.5x10.3 Tube   L9733CN
L9733CNTR Active 2.859 1000 PowerSSO 28 7.5x10.3 Tape And Reel   L9733CNTR
L9733XPTR Active 2.859 1000 PowerSSO 28 7.5x10.3 Tape And Reel   L9733XPTR
DATASHEET
描述 版本 大小
DS0092 : Octal self configuring low/high side driver 10 509KB
MARKETING BROCHURES
描述 版本 大小
BROCTAL0908 : Configurable multichannel drivers 1.0 853KB