L9953LXP Door actuator driver
The L9953LXP is a microcontroller driven multifunctional door actuator driver for automotive applications. Up to three DC motors and three grounded resistive loads can be driven with five half bridges and three highside drivers. The integrated standard serial peripheral interface (SPI) controls all operation modes (forward, reverse, brake and high impedance). All diagnostic informations are available via SPI.
技术特性
- One full bridge for 6A load (Ron=150m Ω )
- Three half bridges for 1.5A load (Ron=800m Ω )
- One highside driver for 6A load (Ron=100m Ω )
- Two highside drivers for 1.5A load (Ron=800m Ω )
- Programmable softstart function to drive loads with higher inrush currents (i.e. current >6A, >1.5A)
- Very low current consumption in stand-by mode (IS < 6μA typ; Tj ≤ 85 °C)
- All outputs short circuit protected
- Current monitor output for highside OUT1, OUT4, OUT5 and OUT8
- All outputs over temperature protected
- Open load diagnostic for all outputs
- Overload diagnostic for all outputs
- Separated half bridges for door lock motor
- PWM control of all outputs
- Charge pump output for reverse polarity protection
|
功能框图
 |
L9953LXP 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| L9953LXPTR |
Active |
4.398 |
1000 |
PowerSSO 36 |
Tape And Reel |
|
L9953LXPTR |
| L9953LXP |
Active |
4.398 |
1000 |
PowerSSO 36 |
Tube |
|
L9953LXP |
DATASHEET
| 描述 |
版本 |
大小 |
| L9953LXP : Door actuator driver |
2 |
507KB |
MARKETING BROCHURES
| 描述 |
版本 |
大小 |
| L9953LXP: Advanced door electronics solutions |
1.0.0 |
697KB |
