L99MC6
The L99MC6 IC is a highly flexible monolithic medium current output driver that incorporates 3 dedicated low-side outputs (channels 4 to 6) and 3 independently self configuring outputs (channels 1 to 3) that can be used as either lowside or high-side drivers in any combination. The L99MC6 can control inductive loads, incandescent bulbs or LEDs.
The L99MC6 can be used in a half bridge configuration with crosscurrent protection.
The channel 2 can be controlled directly via the IN/PWM pin for PWM applications. The IN/PWM signal can be applied to any other output.
The integrated 16-bit standard serial peripheral interface (SPI) controls all outputs and provides diagnostic information: normal operation, openload in off-state, overcurrent, temperature warning, overtemperature.
技术特性
- 3 independently self configuring high-/low-side channels
- 3 low-side channels
- RON = 0.7 Ω (typ) at Tj = 25 °C
- Current limit of each output at min. 0.6 A
- PWM direct mode
- Bulb mode with recovery mode
- LED mode with slew rate control
- Bridge mode with crosscurrent protection
- SPI interface for data communication
- Temperature warning
- All outputs overtemperature protected
- All outputs short-circuit protected
- Configurable open-load detection in off mode
- VCC supply voltage 3.0 V to 5.25 V
- Very low current consumption in standby mode 5 μA (typ)
- Internal clamp diodes
- HS switches operate down to 3 V crank voltage
|
功能框图
 |
L99MC6 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| L99MC6TR |
Active |
3.177 |
1000 |
PowerSSO 16 |
Tape And Reel |
|
L99MC6TR |
| L99MC6 |
Active |
3.177 |
1000 |
PowerSSO 16 |
Tube |
|
L99MC6 |
DATASHEET
| 描述 |
版本 |
大小 |
| L99MC6 : Configurable 6-channel device |
1 |
668KB |
FLYERS
| 描述 |
版本 |
大小 |
| FLL99MC60210: L99MC6: configurable hexa-channel device |
1.0.0 |
301KB |
MARKETING BROCHURES
| 描述 |
版本 |
大小 |
| BROCTAL0908 : Configurable multichannel drivers |
1.0 |
853KB |
| L99MC6 : Advanced door electronics solutions |
1.0.0 |
697KB |
