SPC560P34L1 32-bit Microcontroller for Automotive
This 32-bit system-on-chip (SoC) automotive microcontroller family is the latest achievement in integrated automotive application controllers. It belongs to an expanding range of automotive-focused products designed to address chassis applications—specifically, electrical hydraulic power steering (EHPS) and electric power steering (EPS)—as well as airbag applications.
This family is one of a series of next-generation integrated automotive microcontrollers based on the Power Architecture technology.
The advanced and cost-efficient host processor core of this automotive controller family complies with the Power Architecture embedded category. It operates at speeds of up to 64 MHz and offers high performance processing optimized for low power consumption. It capitalizes on the available development infrastructure of current Power Architecture devices and is supported with software drivers, operating systems and configuration code to assist with users implementations
技术特性
- Up to 64 MHz, single issue, 32-bit CPU core complex (e200z0h)
- Compliant with Power Architecture®embedded category
- Variable Length Encoding (VLE)
- Memory organization
- Up to 256 KB on-chip code flash memory with ECC and erase/program controller
- Additional 64 (4 × 16) KB on-chip data flash memory with ECC for EEPROM emulation
- Up to 20 KB on-chip SRAM with ECC
- Fail-safe protection
- Programmable watchdog timer
- Nexus Class 1 interface
- Interrupts and events
- 16-channel eDMA controller
- 16 priority level controller
- Up to 25 external interrupts
- PIT implements four 32-bit timers
- 120 interrupts are routed via INTC
- 1 general purpose eTimer unit
- 6 timers each with up/down capabilities
- 16-bit resolution, cascadable counters
- Quadrature decode with rotation direction flag
- Double buffer input capture and output compare
- GPIO (37 on LQFP64; 64 on LQFP100) individually programmable as I/O or special function
- Communications interfaces
- 2 LINFlex channels (1× Master/Slave, 1× Master only)
- Up to 3 DSPI channels with automatic chip select generation (up to 8/4/4 chip selects)
- Up to 2 FlexCAN interface (2.0B Active) with 32 message buffers
- 1 safety port based on FlexCAN with 32 message buffers and up to 8 Mbit/s at 64 MHz capability usable as second CAN when not used as safety port
- One 10-bit analog-to-digital converter (ADC)
- Up to 16 input channels (16 on LQFP100 / 12 on LQFP64)
- Conversion time < 1 μs including sampling time at full precision
- Programmable Cross Triggering Unit (CTU)
- 4 analog watchdogs with interrupt capability
- On-chip CAN/UART bootstrap loader with Boot Assist Module (BAM)
- 1 FlexPWM unit: 8 complementary or independent outputs with ADC synchronization signals
|
管脚定义图
|
SPC560P34L1 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
SPC560P34L1CEFBR |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tape And Reel |
-40 °C-125 °C |
SPC560P34L1CEFBR |
SPC560P34L1CEFAR |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tape And Reel |
-40 °C-125 °C |
SPC560P34L1CEFAR |
SPC560P34L1BEABR |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tape And Reel |
-40 °C-125 °C |
SPC560P34L1BEABR |
SPC560P34L1CEFAY |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tray |
-40 °C-125 °C |
SPC560P34L1CEFAY |
SPC560P34L1BEAAR |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tape And Reel |
-40 °C-125 °C |
SPC560P34L1BEAAR |
SPC560P34L1CEFBY |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tray |
-40 °C-125 °C |
SPC560P34L1CEFBY |
SPC560P34L1BEABY |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tray |
-40 °C-125 °C |
SPC560P34L1BEABY |
SPC560P34L1BEAAY |
Active |
|
1000 |
LQFP 64 10x10x1.4 |
Tray |
-40 °C-125 °C |
SPC560P34L1BEAAY |
DATASHEET
描述 |
版本 |
大小 |
SPC560P34L1 :DS6434: 32-bit Power Architecture® based MCU with 320 KB Flash memory and 20 KB RAM for automotive chassis and safety applications |
5 |
967KB |
APPLICATION NOTES
描述 |
版本 |
大小 |
AN4057: SPC560Pxx, SPC56APxx power up HW guideline |
1 |
167KB |
AN3423: Shrinking the AUTOSAR OS: code size and performance optimizations |
1 |
116KB |
AN4035: Flash programming through Nexus/JTAG |
1 |
635KB |
AN4194: Flash Programming for SPC560xx, SPC56APxx and SPC563M64xx devices |
1 |
137KB |
ERRATA SHEETS
描述 |
版本 |
大小 |
ES0141: SPC560P40/SPC560P34 device errata JTAG_ID = 0x1AE2_2041 |
3 |
206KB |
REFERENCE MANUALS
描述 |
版本 |
大小 |
RM0046: SPC560P34/SPC560P40 32-bit MCU family built on the embedded Power Architecture® |
4 |
7726KB |
TECHNICAL NOTES
描述 |
版本 |
大小 |
TN0837: SPC560P34x/SPC560P40x Serial Boot with Autobaud Autoscan reference manual addendum |
1 |
129KB |
USER MANUALS
描述 |
版本 |
大小 |
UM1584: Standard software driver for C90LC Flash in SPC560xx, SPC56APxx and SPC563M64xx |
1 |
262KB |
BOARDS AND TOOLS
型号 |
描述 |
SPC56XXMB |
Evaluation motherboard for SPC56 series microcontrollers |