SPC560P60L5
This 32-bit system-on-chip (SoC) automotive microcontroller family is the latest achievement in integrated automotive application controllers. It belongs to an expanding range of automotive-focused products designed to address chassis applications specifically the airbag application
技术特性
- 64 MHz, dual issue, 32-bit CPU core complex (e200z0h)
- Compliant with Power Architecture®embedded category
- Variable Length Encoding (VLE)
- Memory organizazion
- Up to 1024 KB on-chip code Flash memory with additional 64 KB for EEPROM emulation (data flash), with ECC, with erase/program controller
- Up to 80 KB on-chip SRAM with ECC
- Fail safe protection
- ECC protection on system SRAM and Flash
- SWT with servicing sequence pseudo-random generator
- Non-maskable interrupt for both cores
- Fault collection and control unit (FCCU)
- Safe mode of system-on-chip (SoC)
- Register protection scheme
- Nexus®L2+ interface
- Single 3.3 V or 5 V supply for I/Os and ADC
- 2 on-platform peripherals set with 2 INTC
- 16-channel eDMA controller with multiple transfer request sources
- General purpose I/Os (80 GPIO + 26 GPI on LQFP144; 49 GPIO + 16 GPI on LQFP100)
- 2 general purpose eTimer units
- 6 timers, each with up/down count capabilities
- 16-bit resolution, cascadable counters
- Quadrature decode with rotation direction flag
- Double buffer input capture and output compare
- Communications interfaces
- 2 LINFlex modules (LIN 2.1, 1 × Master/Slave, 1 × Master Only)
- 5 DSPI modules with automatic chip select generation
- 2 FlexCAN interfaces (2.0B Active) with 32 message buffers
- 1 Safety port based on FlexCAN; usable as third CAN when not used as safety port
- 1 FlexRay™ module (V2.1) with dual or single channel, 64 message buffers and up to 10 Mbit/s
- 2 CRC units with three contexts and 3 hardwired polynomials(CRC8,CRC32 and CRC-16-CCITT)
- 10-bit A/D converter
- 27 input channels and pre-sampling feature
- Conversion time < 1 μs including sampling time at full precision
- Programmable cross triggering unit (CTU)
- 4 analog watchdog with interrupt capability
- On-chip CAN/UART Bootstrap loader with boot assist module (BAM)
- Ambient temperature ranges: –40 to 125 °C or –40 to 105 °C
|
管脚定义图
|
SPC560P60L5 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
SPC560P60L5CEFAR |
Active |
|
1000 |
LQFP 144 20x20x1.4 |
Tape And Reel |
-40 °C-125 °C |
SPC560P60L5CEFAR |
SPC560P60L5CEFA |
Active |
|
1000 |
LQFP 144 20x20x1.4 |
|
-40 °C-125 °C |
SPC560P60L5CEFA |
SPC560P60L5CEFAY |
Active |
|
1000 |
LQFP 144 20x20x1.4 |
Tray |
-40 °C-125 °C |
SPC560P60L5CEFAY |
DATASHEET
描述 |
版本 |
大小 |
SPC560P60L5 :DS7066: 32-bit Power Architecture® based MCU with 1088 KB Flash memory and 80 KB RAM for automotive chassis and safety applications |
3 |
1023KB |
APPLICATION NOTES
描述 |
版本 |
大小 |
AN4057: SPC560Pxx, SPC56APxx power up HW guideline |
1 |
167KB |
AN3423: Shrinking the AUTOSAR OS: code size and performance optimizations |
1 |
116KB |
AN4035: Flash programming through Nexus/JTAG |
1 |
635KB |
AN4194: Flash Programming for SPC560xx, SPC56APxx and SPC563M64xx devices |
1 |
137KB |
ERRATA SHEETS
描述 |
版本 |
大小 |
ES0183: SPC56APx, SPC560P54, SPC560P60 device errata JTAG_ID = 0x0AE2_4041 |
1 |
150KB |
ES0194: SPC56AP60x/54x, SPC560P60x/54x device errata JTAG_ID = 0x1AE2_4041 |
1 |
144KB |
REFERENCE MANUALS
描述 |
版本 |
大小 |
RM0083: 32-bit MCU family built on the Power Architecture® embedded category for automotive chassis and safety electronics applications |
3 |
9926KB |
TECHNICAL NOTES
描述 |
版本 |
大小 |
TN0837: SPC560P34x/SPC560P40x Serial Boot with Autobaud Autoscan reference manual addendum |
1 |
129KB |
USER MANUALS
描述 |
版本 |
大小 |
UM1584: Standard software driver for C90LC Flash in SPC560xx, SPC56APxx and SPC563M64xx |
1 |
262KB |