SPC563M64CAL176 Calibration system for SPC563M (Monaco) series 1M5 for QFP176

The SPC563M64CALxx is a calibration and emulation system supporting the STMicroelectronics®SPC563Mxx family of automotive microprocessors.

The Calibration Adapter is designed to substitute the QFP device on an ECU version during engine calibration.

The complete system consists of a SPC563M64CAL176/176 board and a POLYPOD-TQ144/176 Poly-Pod which plugs directly into the motherboard.

The Calibration Adapter can also be used as emulation board as the Nexus trace port on CSP496 allows using the pins for application

Support for LQFP144 and LQFP176 MCU production packages allowing calibration systems to be built without requiring modifications to the standard production system housing
2MByte static RAM organized as 1024K words by 16 bits
On-board latch providing a 16-bit de-multiplexed bus interface from the SPC563M64 16-bit multiplexed calibration interface;
Support for Nexus-based debug tools even if application PCB does not include Nexus connector
Nexus functionality with 12 Message Data Out (MDO) signals
Support for full-feature calibration tools via availability of comprehensive set of device signals available on the connectors.
ERNI 154819 connector optimized for calibration
High speed CAN transceiver with signals protection
Specifications:
- Board Size 36 x 61.8 mm
- Target connector compatible with TQPACK144SD and TQPACK176SD sockets

SPC563M64CAL176 功能框图

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
SPC563M64CAL176	Active			CARD			SPC563M64CAL176

描述	版本	大小
SPC563M64CAL176 :DB1726: SPC563M64xx microcontroller family calibration and emulation system	1	136KB

描述	版本	大小
AN4057: SPC560Pxx, SPC56APxx power up HW guideline	1	167KB