SPZB250 Low Power Consumption ZigBee Module / 802.15.4 Solution

SPZB250 is a low power consumption ZigBee® module based on EM250 ZigBee® system-on-chip which integrates a 16 bit processor together with a 2.4 GHz, IEEE 802.15.4-compliant transceiver as well as IEEE 802.15.4 PHY and MAC. It enables OEMs to easily add wireless networking capability to any electronic device. Such a module is a very comprehensive solution to build wireless sensors with meshing and self healing capability as required in a WSN scenario. 24 MHz high stability crystal is integrated in the module to perform the timing requirements as per ZigBee® specifications. An additional 32.768 kHz crystal is provided for low power operation. To support user defined applications, a number of peripherals such as GPIO, UART, I²C, ADC and general purpose timers are available and user selectable. The deep sleep mode with power consumption less than 2 μA (typ) allows the use in applications where the battery life is a key constraint. For other information and details, please refer to EM250 datasheet available at the Ember Corporation website.

技术特性

Integrated 2.4 GHz, IEEE 802.15.4-compliant transceiver, PHY and MAC
- 3 dBm nominal TX output power
- -95 dBm (typ) RX sensitivity
- + 5 dBm in boost mode
Integrated Murata antenna
128 kb embedded Flash and 5 kb integrated SRAM for program and data storage
17 GPIO with alternate functions: GPIOs, UART, I²C, SPI, ADC
2 16-bit general purpose timers: one 16-bit sleep timer
ADC, sigma-delta converter with 12-bit resolution
On board 24 MHz stable crystal
Selectable integrated RC oscillator (typ 10 kHz) or 32.768 kHz crystal for low power operation
< 2 μ A (typ) power consumption in deep sleep mode
Watchdog timer and power on reset
Pins available for non-intrusive debug interface (SIF)
Single supply voltage 2.1 to 3.6 Vdc
CE and FCC compliance. FCC ID:S9NZB250A

功能框图

SPZB250 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
SPZB250	Active			SSYST. ZIGBEE	EM250		SPZB250

DATASHEET

描述	版本	大小
SPZB250 : ZigBee® module	6	407KB