STA323W 2.1-channel high-efficiency digital audio system
The STA323W is a single-chip audio system comprising digital audio processing, digital amplifier control and a DDX® power-output stage. The STA323W uses all-digital amplification to provide high-power, high-quality and high-efficiency.
The STA323W power section consists of four independent half-bridges. These can be configured, by digital control, to operate in the following modes.
- Two channels, provided by two half-bridges, and a single full-bridge, giving up to 2x10W + 1x20W of power output.
- Two channels, provided by two full-bridges, giving up to 2x20W of power.
- A single, parallel, full-bridge channel capable of high-current operation and giving 1 x 40W output.
The STA323W also provides a full set of digital processing features. This includes up to four programmable 28-bit biquads (EQ) per channel, and bass and treble tone control. Automodes™ enable a time-to-market advantage by substantially reducing the amount of software development needed for specific functions. These includes auto volume loudness, preset volume curves and preset EQ settings. New advanced AM radio-interference reduction modes are also provided.
The serial audio data input interface accepts all formats, including the I2S.
Three channels of DDX® processing are provided. This high-quality conversion from PCM audio to DDX patented 3-state PWM switching provides over 100dB SNR and dynamic range
技术特性
- Wide supply voltage range (10V-36V)
- 3 Power output configurations
- Thermal protection
- Under-voltage protection
- Short-circuit protection
- PowerSO-36 slug down package
- 2.1 Channels of 24-Bit DDX ®
- 100dB SNR and dynamic range
- 32kHz to 192kHz input sample rates
- Digital gain/attenuation +48dB to -80dB in 0.5dB steps
- Four 28-bit user programmable biquads (EQ) per channel
- I²C Control
- 2-Channel I2S input data interface
- Individual channel and master gain/attenuation
- Individual channel and master soft and hard mute
- Individual channel volume and EQ bypass
- DDX® POP free operation
- Bass/treble tone control
- Dual independent programmable limiters/compressors
- Automodes™
- 15 preset crossover settings
- Auto volume controlled loudness
- 2 preset anti-clipping modes
- Preset night-time listening mode
- Input and output channel mapping
- AM noise-reduction and PWM frequency shifting modes
- Soft volume update and muting
- Auto zero detect and invalid input detect muting selectable DDX® ternary or binary PWM output plus variable PWM speeds
- Selectable de-emphasis
- Post-EQ user programmable mix with default 2.1 bass management settings
- Variable max power correction for lower full-power THD
- Four output routing configurations
- Selectable clock input ratio
- 96kHz internal processing sample rate, 24 to 28-bit precision
- Video application: 576*fs input mode
|
功能框图
|
STA323W 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
STA323W |
Active |
|
1000 |
PowerSO 36 MC |
Tube |
|
STA323W |
STA323W13TR |
Active |
|
1000 |
PowerSO 36 MC |
Tape And Reel |
|
STA323W13TR |
DATASHEET
下载 |
描述 |
版本 |
大小 |
STA323W |
DS4377: 2.1-channel high-efficiency digital audio system |
6 |
1510KB |
APPLICATION NOTES
下载 |
描述 |
版本 |
大小 |
AN3340 |
AN3340: Loudspeaker characterization and compensation |
1 |
3944KB |
AN3984 |
AN3984: IIR filter design equations for Sound Terminal® devices |
1 |
494KB |