STEVAL-ISA055V1 0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX
This demonstration board is based on the ST1S12 family of synchronous step-down DC-DC converters optimized for powering low-voltage digital cores in HDD (hard disk drive) applications and is generally used to replace high-current linear solutions when power dissipation may cause high heating of the application environment.
It provides up to 0.7 A over an input voltage range of 2.5 V to 5.5 V. A high switching frequency of 1.7 MHz allows the use of tiny surface-mount components. For the adjustable version, a resistor divider to set the output voltage value, an inductor, and two capacitors are required. Only an inductor and 2 capacitors are needed for the 1.2 V and 1.8 V fixed version. A low output ripple is guaranteed by the current mode PWM topology and by the use of low ESR surface-mount ceramic capacitors.
The ST1S12 device is thermal protected and current limited to prevent damage due to accidental short-circuit. This family of products is available in the TSOT23-5L package.
技术特性
- Step-down current mode PWM (1.7 MHz) DCDC converter
- Fixed output voltage of 1.2 V
- 0.7 A output current capability
- 3% DC output voltage tolerance
- Synchronous rectification
- Enable function
- Internal soft-start
- Typical efficiency: > 90%
- Not switching quiescent current: max 600 μA over temperature range
- RDS(on) typ. 250 m Ω and 400 m Ω
- Uses tiny capacitors and inductors
| 功能框图
 |
STEVAL-ISA055V1 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STEVAL-ISA055V1 |
Active |
|
1000 |
|
|
|
|
DATA BRIEF
| 描述 |
版本 |
大小 |
| STEVAL-ISA055V1 : DB0691: 0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX |
1 |
73KB |
APPLICATION NOTES
| 描述 |
版本 |
大小 |
| AN2565: PM6680A evaluation kit dual step-down controller with auxiliary voltages |
2 |
1100KB |
BILL OF MATERIALS
SCHEMATIC PACKS
PCB LAYOUTS
