STEVAL-ISA056V1 6 rows - 30 mA LEDs driver with boost converter for LCD panels backlight evaluation board based on the PM6600
This evaluation board based on the PM6600 consists of a high efficiency monolithic boost converter and six controlled current generators (rows) specifically designed to supply LEDs arrays used in the backlight of LCD panels. The device can manage an output voltage up to 36 V (i.e. ten white-LEDs per row).
The generators can be externally programmed to sink up to 30 mA and can be dimmed via a PWM signal (1% dimming duty-cycle at 20 kHz can be managed). The device allows to detect and manage the open and shorted LED faults and to let unused rows floating. Basic protections (output over-voltage, internal MOSFET overcurrent and thermal shutdown) are provided
技术特性
- Boost section
- 4.5 V to 28 V input voltage range
- Internal +5 V LDO for device supply
- Up to 36 V output voltage
- Constant frequency peak current-mode ctrl
- 200 kHz to 1 MHz adjustable switching frequency
- External sync for multi-device application
- Pulse-skip power saving mode at light load
- Programmable OVP protection
- Single ceramic output capacitor
- Backlight driver section
- Six rows with 30mA maximum current capability (adjustable)
- Less than 500 ns minimum dimming time (1% minimum dimming duty-cycle at 20 kHz dimming frequency)
- ±2.0% current matching between rows
- LED failure (open and short circuit) detection
| 功能框图
|
STEVAL-ISA056V1 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
STEVAL-ISA056V1 |
Active |
|
1000 |
|
|
|
|
DATA BRIEF
描述 |
版本 |
大小 |
STEVAL-ISA056V1 : 6 rows - 30 mA LEDs driver with boost converter for LCD panels backlight evaluation board based on the PM6600 |
1 |
93KB |
APPLICATION NOTES
描述 |
版本 |
大小 |
AN2787: Monolithic VR demonstration board for chipset and DDR2/3 supply for ultramobile PC (UMPC) applications |
1 |
2594KB |
AN2936: 10 W SMPS with HV power MOSFET and the L6565 for three-phase industrial applications |
1 |
303B |
BILL OF MATERIALS
SCHEMATIC PACKS
PCB LAYOUTS