STEVAL-MKI100V1 MEMS demonstration board based on LPY4150AL (dual-axis pitch and yaw ±1500 dps analog gyroscope)
The STEVAL-MKI100V1 is a demonstration board designed to provide the user with a complete, ready-to-use platform for demonstration of the LPR4150AL product family.
The kit includes a sensing element and an IC interface capable of translating information from the sensing element into a measured signal that can be used for external applications.
In addition to the MEMS sensor, the demonstration board uses an ST7 microcontroller which functions as a bridge between the sensor and the PC. This makes it possible to download the graphical user interface (GUI) from the website or to use dedicated software routines for customized applications.
The STEVAL-MKI100V1 demonstration board has been designed for use in two working modes: analog and digital.
In analog working mode (AWM), the microcontroller on the board is disabled and the analog outputs of the device are available to the user on a dedicated connector. This is the default working mode when the power supply is applied either through the USB connector or through the supply connector.
In digital working mode (DWM), the microcontroller on the board is enabled and it allows the user to digitally acquire the output signals of the device, to see them on the PC through the dedicated GUI, and to control the control pins of the device.
技术特性
- Two working modes:
- RoHS compliant
| 功能框图
 |
STEVAL-MKI100V1 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STEVAL-MKI100V1 |
Active |
|
1000 |
|
|
|
STEVAL-MKI100V1 |
DATA BRIEF
| 描述 |
版本 |
大小 |
| STEVAL-MKI100V1 : MEMS demonstration board based on the LPY4150AL (dual-axis pitch and yaw ±1500 dps analog gyroscope) |
1 |
122KB |
USER MANUALS
| 描述 |
版本 |
大小 |
| UM1049: Unico GUI: software guide |
2 |
1838KB |
| UM1064: Software guide for Unico Lite |
2 |
349KB |
LICENSE AGREEMENTS
BILL OF MATERIALS
SCHEMATIC PACKS
PCB LAYOUTS
