STG4158 Low voltage 0.6 Ω typ single SPDT switch with break-before-make feature and 15 kV ESD protection

The STG4158 is a high-speed CMOS low-voltage single analog SPDT (single-pole dual throw) switch or 2:1 multiplexer/demultiplexer switch fabricated in silicon gate C2MOS technology. Designed to operate from 1.65 to 4.5 V, this device is ideal for portable applications.

It offers low ON-resistance (0.6 Ω) at VCC= 4.5 V (typical TA= 25 °C). The SEL input threshold is compatible with 1.8 V, and provides control to the switches.

The switch S1 is ON (connected to common port D) when the SEL input is held high and OFF (high-impedance state exists between the two ports) when SEL is held low. The switch S2 is ON (connected to common port D) when the SEL input is held low and OFF (high-impedance state exists between the two ports) when SEL is held high.

The SEL input has an integrated weak pull-down resistor to prevent the SEL signal from floating. For low-power consumption, the SEL input must be grounded.

The STG4158 features power-off and overvoltage protection, enabling the device to be isolated during voltage fault events

技术特性

Power-off and overvoltage protection
Wide operating voltage range: VCC(opr) = 1.65 to 4.5 V
Low ON-resistance VIN = 0 V:
- RON= 0.85 Ω (max.) at VCC= 4.5 V
Latch-up performance exceeds 300 mA JESD 17
ESD performance tested on (D pin)
- 8 kV IEC-61000-4-2 ESD, contact discharge
- 15 kV IEC-61000-4-2 ESD, air discharge
ESD performance test on all other pins
- 3 kV human body model
- 200 V machine model (IEC61340-3-2 level M2)
- 1000 V charge device model (JESD22 C101)

STG4158 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
STG4158BJR	Active		1000	CSPS0.4 4-6	Tape And Reel		STG4158BJR

DATASHEET

描述	版本	大小
STG4158 : DS5582: Low-voltage 0.6 ohm typ. single SPDT switch with break-before-make feature and 15 kV ESD protection	2	553KB