STG4159 Low Voltage 0.3 Ohm Max Single SPDT Switch with Break-Before-Make Feature and 10kV Contact ESD Protection

The STG4159 is a high-speed CMOS low voltage single analog SPDT (single pole dual throw) switch or 2:1 multiplexer/demultiplexer switch fabricated in silicon gate C2MOS technology. It is designed to operate from 1.65 V to 4.8 V, making this device ideal for portable applications. It offers low ON-resistance (0.30 Ω) at VCC = 4.3 V. The SEL inputs are provided to control the switches.

The switch S1 is ON (connected to common port D) when the SEL input is held high and OFF (high impedance state exists between the two ports) when SEL is held low; the switch S2 is ON (it is connected to common port D) when the SEL input is held low and OFF (high impedance state exist between the two ports) when SEL is held high.

Additional key features are fast switching speed, break-before-make delay time and ultra low power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them ESD immunity and transient excess voltage

技术特性

Wide operating voltage range:
- VCC(OPR) = 1.65V to 4.8V
Low power dissipation:
- ICC = 0.2 μA (max.) at TA = 85°C
Low "ON" resistance VIN = 0V:
- RON = 0.40 Ω(max. TA = 25ºC) at VCC = 2.25V
- RON = 0.35 Ω(max. TA = 25ºC) at VCC = 3.0V
- RON = 0.30 Ω(max. TA = 25ºC) at VCC = 4.3V
Separate supply voltage for switch and control pin
Latch-up performance exceeds 100mA per JESD 78, Class II
ESD performance tested on common channel (D pin)
- 10kV IEC-61000-4-2 ESD, contact discharge
- 15kV IEC-61000-4-2 ESD, air discharge
ESD performance test on all other pins
- 10kV IEC-61000-4-2 ESD, contact discharge
- 500V machine model (JESD22 A115-A)
- 1500V charged-device model (JESD22 C101)

STG4159 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
STG4159BJR	Active		1000	CSPS0.5 7-10	Tape And Reel		STG4159BJR

DATASHEET

描述	版本	大小
STG4159 : Low voltage 0.3 Ω max single SPDT switch with break-before-make feature and 10 kV contact ESD protection	5	515KB