The STLC3055N is a SLIC device specifically designed for wireless local loop (WLL) and ISDNterminal adaptors (ISDN-TA) and VoIP applications. One of the distinctive characteristic of this device is the ability to operate with a single supply voltage (from 5.5 V to 12 V) and self generate the negative battery by means of an on chip DC/DC converter controller that drives an external MOS switch.
The battery level is properly adjusted depending on the operating mode. A useful characteristic for these applications is the integrated ringing generator.
The control interface is a parallel type with open drain output and 3.3 V logic levels.
The metering pulses are generated on chip starting from two logic signals (0 and 3.3 V) one define the metering pulse frequency and the other the metering pulse duration. An on chip circuit then provides the proper shaping and filtering.
Metering pulse amplitude and shaping (rising and decay time) can be programmed by external components. A dedicated cancellation circuit avoid possible codec input saturation due to metering pulse echo.
Constant current feed can be set from 20 mA to 40 mA. Off-hook detection threshold is programmable from 5 mA to 9 mA.
The device, developed in BCD III S technology (90 V process), operates in the extended temperature range and integrates a thermal protection that sets the device in power down when Tj exceeds 140 °C.
技术特性
|
功能框图 |
订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
E-STLC3055N | Active | LQFP 44 10x10x1.4 | Tray | E-STLC3055N | |||
STLC3055N | Active | LQFP 44 10x10x1.4 | Tray | STLC3055N |
描述 | 版本 | 大小 |
STLC3055N : WLL and ISDN-TA subscriber line interface circuit | 11 | 320KB |
描述 | 版本 | 大小 |
AN2117: STLC3055N SINGLE SUPPLY SLIC FOR WILL APPLICATION | 2 | 166KB |
描述 | 版本 | 大小 |
UM0270: Evaluation board with STLC3055N SLIC for WLL | 1 | 375KB |