The battery level is properly adjusted depending on the operating mode. A useful characteristic for these applications is the integrated ringing generator.
The control interface is parallel with open drain output and 3.3 V logic levels.
The metering pulses are generated on-chip starting from two logic signals (0 and 3.3 V): one signal defining the metering pulse frequency, the other signal defining the metering pulse duration.
An on-chip circuit then provides the proper shaping and filtering. Metering pulse amplitude and shaping (rising and decay time) can be programmed by external components.
A dedicated cancellation circuit avoids possible codec input saturation due to metering pulse echo.
Constant current feed can be set from 20 mA to 40 mA. Off-hook detection threshold is programmable from 5 mA to 9 mA.
The device, which is developed in BCDIIIS technology (90 V process), operates in the extended temperature range and integrates a thermal protection that sets the device in power down when Tj exceeds 140 °C.
技术特性
|
功能框图 |
订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
E-STLC3075TR | Active | LQFP 44 10x10x1.4 | Tape And Reel | E-STLC3075TR | |||
E-STLC3075 | Active | LQFP 44 10x10x1.4 | Tray | E-STLC3075 |
描述 | 版本 | 大小 |
STLC3075 : WLL and ISDN-TA subscriber line interface circuit | 11 | 320KB |
描述 | 版本 | 大小 |
AN2132: STLC3075 VERY LOW SINGLE SUPPLY SLIC FOR WLL APPLICATION IN FLY-BACK CONFIGURATION | 3 | 343KB |
AN2118: STLC3075 SINGLE SUPPLY SLIC FOR WLL APPLICATION IN BUCK-BOOST CONFIGURATION | 3 | 254KB |
描述 | 版本 | 大小 |
UM0271: Evaluation board with STLC3075 SLIC for WLL | 1 | 414KB |