STM8TL53F4 8-bit, ultra-low-power, touch-sensing MCUs with 16-Kbyte Flash and proximity detection
The STM8TL5xxx devices feature the enhanced STM8 CPU core providing increased processing power (up to 16 MIPS at 16 MHz) while maintaining the advantages of a CISC architecture with improved code density, a 24-bit linear addressing space and an optimized architecture for low power operations. It uses a ProxSense charge transfer capacitive acquisition method that is capable of near range proximity detection.
The family includes an integrated debug module with a hardware interface (SWIM) which allows non-intrusive in-application debugging and ultrafast Flash programming. All STM8TL5xxx microcontrollers feature low power low-voltage single-supply program Flash memory.
The STM8TL5xxx are based on a generic set of state-of-the-art peripherals. The modular design of the peripheral set allows the same peripherals to be found in different ST microcontroller families including 32-bit families. This makes any transition to a different family very easy, and simplified even more by the use of a common set of development tools
技术特性
- Operating conditions
- Operating power supply: 1.65 V to 3.6 V
- Temperature range: –40 °C to 85 °C
- Low power features
- 4 low power modes: Wait, Active-halt with AWU (1 μA), Active-halt with ProxSense™ (10 μA with scan every 200 ms),Halt (0.4 μA)
- Dynamic power consumption: 150 μA/MHz
- Fast wakeup from Halt mode: 4.7 μs
- Ultralow leakage per I/O: 50 nA
- Advanced STM8 Core
- Harvard architecture with 3-stage pipeline
- Max freq.16 MHz,16 CISC MIPS peak
- Memories
- Up to 16 Kbytes of Flash program including up to 2 Kbytes of data EEPROM
- Error correction code (ECC)
- Flexible write and read protection modes
- In-application and in-circuit programming
- Clock management
- Internal 16 MHz factory-trimmed RC
- Internal 38 kHz low consumption RC driving both the IWDG and the AWU
- Reset and supply management
- Ultralow power, ultrasafe power-on reset/ power-down reset
- Interrupt management
- Nested interrupt controller with software priority control
- Up to 22 external interrupt sources
- I/Os
- Up to 23 with 22 mappable on external interrupt vectors
- I/Os with programmable input pull-ups, high sink/source capability
- ProxSense™ patented acquisition technology with up to 300 touch sensing channels (20 receiver/transmitter channels and 15 transmitter channels) supporting projected capacitive acquisition method suitable for proximity detection.
- Timers
- Two 16-bit general purpose timers (TIM2 and TIM3) with up and down counter and 2 channels (used as IC, OC, PWM)
- One 8-bit timer (TIM4) with 7-bit prescaler
- Beeper timer with 1, 2 or 4 kHz frequencies
- Communication interfaces
- SPI synchronous serial interface
- Fast I²C Multimaster/slave 400 kHz
- USART with fractional baud rate generator
- Development support
- Hardware single wire interface module (SWIM) for fast on-chip programming and non intrusive debugging
- In-circuit emulation (ICE)
- 96-bit unique ID
STM8TL53F4 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
STM8TL53F4P6 |
Evaluation |
|
1000 |
TSSOP 20 |
Tube |
-40 °C-85 °C |
STM8TL53F4P6 |
DATASHEET
描述 |
版本 |
大小 |
STM8TL53F4 : DS8701: 8-bit ultralow power touch sensing microcontroller with 16 Kbytes Flash, ProxSense™, timers, USART, SPI, I²C |
2 |
1014KB |
APPLICATION NOTES
描述 |
版本 |
大小 |
AN3342: Getting started with STM8TL53xx |
2 |
1143KB |
AN3404: Low power considerations for STM8TL53xx devices |
2 |
338KB |
AN2639: Soldering recommendations and package information for Lead-free ECOPACK® microcontrollers |
2 |
209KB |
AN2869: Guidelines for designing touch sensing applications |
6 |
980KB |
AN4038: Guidelines to optimize proximity detection with STM8TL5xxx capacitive sensors |
1 |
1025KB |
ERRATA SHEETS
描述 |
版本 |
大小 |
ES0186: STM8TL5x limitations |
2 |
109KB |
DEVICE OPTION LISTS
PROGRAMMING MANUALS
描述 |
版本 |
大小 |
PM0212: How to program the STM8TL5xxx Flash program memory and data EEPROM |
2 |
157KB |
REFERENCE MANUALS
描述 |
版本 |
大小 |
RM0312: STM8TL5xxx microcontroller family |
2 |
3750KB |
TECHNICAL NOTES
描述 |
版本 |
大小 |
TN0189: STM8 bootloader frequently asked questions |
2 |
321KB |
BOARDS AND TOOLS
Part Number |
描述 |
STM-STUDIO |
STM Studio run-time variables monitoring and visualization tool |
STVP |
ST Visual Programmer for programming ST7, STM8, STM8T and STM32 |
AD/Stice_Connect |
Connection Adapter to use with STICE-SYS00x emulation systems |
ST-LINK |
In-circuit debugger and programmer for STM8 and STM32 MCUs; with IAR EWARM and Keil RVMDK and ST toolset |
AS/Stice_Connect |
Adapter Socket for application board - to use with STICE-SYS00x emulation systems |
ST-LINK/V2 |
ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 |
STVD |
ST Visual develop IDE for developing ST7 and STM8 applications |
STICE |
Full-featured emulator offers flexible, modular debugging and programming solution |
STX-RLINK |
In-circuit debugger/programmer supporting JTAG and ICC protocols for STM8, ST7, uPSD, STM32, STR7 and STR9 microcontrollers |
CF/Stice_Connect |
Connexion flex to use with STICE-SYS00x emulation systems |
FIRMWARE
SW DEMOS
SW DRIVERS
MARKETING BROCHURES
描述 |
版本 |
大小 |
BRSTM800212 : STM8 product families |
1.0.0 |
1565KB |