STOD2540 PMOLED display power supply
STOD2540 is dedicated to passive matrix OLED (PMOLED) displays for portable handsets and provides the pre-charge and biasing voltage of the column matrix driver as shown in figure 3. The current capability of STOD2540 allows feeding a 1", 1.3" or 1.5" color PMOLED. STOD2540 is a boost converter that operates from 3.0 V to 5.5 V and can provide an output voltage as high as 25 V. The output current capability is maximum 40 mA up to 25 V output voltage. The regulation is performed by a resistor divider network (figure 3) that detects the output voltage.
In this state-of-the-art boost converter, a DC current path exists between the battery source and the load. In order to reduce the consumption in shutdown mode, a high-side load isolation switch is necessary to cut this DC current path in standby mode. The load disconnect switch (LDS) act as an isolation switch in shutdown mode
技术特性
- Inductor switches boost controller
- PFM mode control
- High efficiency over wide range of load (1 mA to 40 mA)
- Integrated load disconnect switch
- Over voltage protection with automatic restart
- Soft start with adjustable peak current limit
- Enable pin
- Low shutdown current
- Small external inductor
- Supply voltage from 3.0 V to 5.5 V
|
功能框图
![](/image/st/STOD2540.png) |
STOD2540 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
STOD2540PUR |
Active |
0.677 |
1000 |
VFDFPN 8 3x3x1.0 |
Tape And Reel |
|
STOD2540PUR |
DATASHEET
描述 |
版本 |
大小 |
STOD2540 : DS4676: PMOLED display power supply |
10 |
580KB |
APPLICATION NOTES
描述 |
版本 |
大小 |
AN3008: STOD2540, single inductor DC-DC converter generates multiple supply voltages for E-paper display |
2 |
695KB |
BOARDS AND TOOLS
型号 |
描述 |
STEVAL-CLP001V1 |
Demonstration board for PMOLED display power supply based on the STOD2540 |