VN5050AJ-E Single channel high side driver

The VN5050AJ-E is a monolithic device made using STMicroelectronics VIPower technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table).

This device integrates an analog current sense which delivers a current proportional to the load current (according to a known ratio) when CS_DIS is driven low or left open.

When CS_DIS is driven high, the CURRENT SENSE pin is in a high impedance condition. Output current limitation protects the device in overload condition. In case of long overload duration, the device limits the dissipated power to safe level up to thermal shut-down intervention. Thermal shut-down with automatic restart allows the device to recover normal operation as soon as fault condition disappears.

技术特性

General features
- Inrush current active management by power limitation
- Very low stand-by current
- 3.0V CMOS compatible input
- Optimized electromagnetic emission
- Very low electromagnetic susceptibility
- In compliance with the 2002/95/EC European directive
Diagnostic functions
- Proportional load current sense
- High current sense precision for wide range currents
- Current sense disable
- Thermal shutdown indication
- Very low current sense leakage
Protection
- Undervoltage shut-down
- Overvoltage clamp
- Load current limitation
- Self limiting of fast thermal transients
- Protection against loss of ground and loss of VCC
- Thermal shut down

功能框图

VN5050AJ-E 订购信息

订购型号	产品状态	美金价格	数量	封装	包装形式	温度范围	材料声明
VN5050AJTR-E	Active	0.882	1000	PowerSSO 12	Tape And Reel		VN5050AJTR-E
VN5050AJ-E	Active	0.882	1000	PowerSSO 12	Tube		VN5050AJ-E

DATASHEET

描述	版本	大小
VN5050AJ-E : Single channel high side driver with analog sense for automotive applications	6	817KB