VN5E010MH-E Single-channel high-side driver with analog current sense for automotive applications

The VN5E010MH-E is a single-channel high-side driver manufactured in the ST proprietary VIPower M0-5 technology and housed in the tiny HPAK package. The VN5E010MH-E is designed to drive 12 V automotive grounded loads delivering protection, diagnostics and easy 3 V and 5 V CMOS compatible interface with any microcontroller.

The device integrates advanced protective functions such as load current limitation, inrush and overload active management by power limitation, overtemperature shut-off with auto restart and overvoltage active clamp.

A dedicated analog current sense pin is associated with every output channel in order to provide enhanced diagnostic functions including fast detection of overload and short-circuit to ground through power limitation indication and overtemperature indication.

The current sensing and diagnostic feedback of the whole device can be disabled by pulling the CS_DIS pin high to allow sharing of the external sense resistor with other similar devices.

技术特性
  • General
    • Inrush current active management by power limitation
    • Very low standby current
    • 3 V CMOS compatible inputs
    • Optimized electromagnetic emissions
    • Very low electromagnetic susceptibility
    • In compliance with the 2002/95/EC european directive
    • Very low current sense leakage
  • Diagnostic functions
    • Proportional load current sense
    • High current sense precision for wide current range
    • Current sense disable
    • Output short to ground indication
    • Overload and short to ground (power limitation) indication
    • Thermal shutdown indication
  • Protections
    • Undervoltage shutdown
    • Overvoltage clamp
    • Load current limitation
    • Self limiting of fast thermal transients
    • Protection against loss of ground and loss of VCC
    • Overtemperature shutdown with autorestart (thermal shutdown)
    • Reverse battery protection with self switch on of the Power MOSFET
    • Electrostatic discharge protection
功能框图
VN5E010MH-E 订购信息
订购型号 产品状态 美金价格 数量 封装 包装形式 温度范围 材料声明
VN5E010MH-E Active 1.513 1000 TO-252 6L Tube   VN5E010MH-E
VN5E010MHTR-E Active 1.513 1000 TO-252 6L Tape And Reel   VN5E010MHTR-E
DATASHEET
描述 版本 大小
VN5E010MH-E : Single-channel high-side driver with analog current sense for automotive applications 5 803KB