TLV431B-Q1 汽车类低压可调节精密并联稳压器
|
TLV431A-Q1 |
TLV431B-Q1 |
| VO Adj(Min)(V) |
1.24 |
1.24 |
| VO Adj(Max)(V) |
6 |
6 |
| Initial Accuracy @ 25/deg C(%) |
1 |
0.5 |
| Temp Coeff(Max)(ppm/ degree C) |
129 |
|
| Temp Coeff(Typ)(ppm/ degree C) |
39 |
|
| Min Iz for Regulation(uA) |
80 |
80 |
| Iout/Iz(Max)(mA) |
15 |
15 |
| Pin/Package |
5SOT-23 |
3SOT-23, 5SOT-23 |
| Approx. Price (US$) |
0.37 | 1ku |
0.44 | 1ku |
| Operating Temperature Range(°C) |
-40 to 125 |
-40 to 125 |
| Rating |
Automotive |
Automotive |
TLV431B-Q1 说明
The TLV431 is a low-voltage 3-terminal adjustable voltage reference with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1.24 V) and 6 V with two external resistors (see Figure 2). These devices operate from a lower voltage (1.24 V) than the widely used TL431 and TL1431 shunt-regulator references.
When used with an optocoupler, the TLV431 is an ideal voltage reference in isolated feedback circuits for 3-V to 3.3-V switching-mode power supplies. These devices have a typical output impedance of 0.25 Ω. Active output circuitry provides a very sharp turn-on characteristic, making them excellent replacements for low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies.
TLV431B-Q1 特性
- Qualified for Automotive Applications
- Low-Voltage Operation: VREF = 1.24 V
- Adjustable Output Voltage, VO = VREF to 6 V
- Reference Voltage Tolerances at 25°C
- 0.5% for TLV431B
- 1% for TLV431A
- Typical Temperature Drift: 11 mV
- Low Operational Cathode Current :80 µA Typ
- 0.25-Ω Typical Output Impedance
- See TLVH431 and TLVH432 for
- Wider VKA (1.24 V to 18 V) and IK (80 mA)
- Additional SOT-89 Package
- Multiple Pinouts for SOT-23-3 and SOT-89 Packages
TLV431B-Q1 芯片订购指南
| 器件 |
状态 |
温度 (oC) |
价格（美元） |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TLV431BQDBVRQ1 |
ACTIVE |
-40 to 125 |
0.44 | 1ku |
SOT-23 (DBV) | 5 |
3000 |
|
| TLV431BQDBZRQ1 |
ACTIVE |
-40 to 125 |
0.44 | 1ku |
SOT-23 (DBZ) | 3 |
3000 |
TKZU |
TLV431B-Q1 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TLV431BQDBVRQ1 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
|
TLV431BQDBVRQ1 |
| TLV431BQDBZRQ1 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
|
TLV431BQDBZRQ1 |
TLV431B-Q1 应用技术支持与电子电路设计开发资源下载
- TLV431B-Q1 数据资料 dataSheet 下载.PDF
- TI 德州仪器并联电压基准产品选型与价格参考 . xls
- 模数规格和性能特性术语表 (Rev. A) (PDF 1993 KB)
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
- Shelf-Life Evaluation of Lead-Free Component Finishes (PDF
1305 KB)
- Analog-to-Digital Converter Grounding Practices Affect System
Performance (PDF 56 KB)
- Principles of Data Acquisition and Conversion (PDF 50 KB)
- Interleaving Analog-to-Digital Converters (PDF 64 KB)
- What
Designers Should Know About Data Converter Drift (PDF 95 KB)
- Giving Delta-Sigma Converters a Gain Boost with a Front End
Analog Gain Stage (PDF 70 KB)
- Programming Tricks for Higher Conversion Speeds Utilizing Delta
Sigma Converters (PDF 105 KB)
TLV431B-Q1 工具与软件
| 名称 |
型号 |
公司 |
工具/软件类型 |
| 针对 Code Composer Studio 的 DCPFREETOOL 软件插件 |
DCPFREETOOL |
Texas Instruments |
实用程序/插件 |
| MDACBufferPro Design Utility for Multiplying Digital to Analog Converter Design |
MDACBUFFERPRO |
Texas Instruments |
应用软件 |
