AD584JNZ: Pin Programmable Precision Voltage Reference
The AD584 is an eight-terminal precision voltage reference offering pin-programmable selection of four popular output voltages: 10.000 V, 7.500 V, 5.000 V and 2.500 V. Other output voltages, above, below or between the four standard outputs, are available by the addition of external resistors. Input voltage may vary between 4.5 and 30 volts.
Laser Wafer Trimming (LWT) is used to adjust the pin-programmable output levels and temperature coefficients, resulting in the most flexible high precision voltage reference available in monolithic form.
In addition to the programmable output voltages, the AD584 offers a unique strobe terminal which permits the device to be turned on or off. When the AD584 is used as a power supply reference, the supply can be switched off with a single, low-power signal. In the "off" state the current drain by the AD584 is reduced to about 100 µA. In the "on" state the total supply current is typically 750µA including the output buffer amplifier.
The AD584 is recommended for use as a reference for 8-, 10- or 12-bit D/A converters which require an external precision reference. The device is also ideal for all types of A/D converters of up to 14-bit accuracy, either successive approximation or integrating designs, and in general can offer better performance than that provided by standard self-contained references.
The AD584J, K and L are specified for operation from 0°C to +70°C; the AD584S and T are specified for the -55°C to +125°C range. All grades are packaged in a hermetically sealed eight-terminal TO-99 metal can; the AD584 J and K are also available in an 8-pin plastic DIP
AD584JNZ 特点
- Four Programmable Output Voltages: 10.000 V, 7.500 V, 5.000 V, 2.500 V
- Laser Trimmed to High Accuracies
- No External Components Required
- Trimmed Temperature Coefficient:
5 ppm/°C Max, 0°C to 70°C (AD584L)
15 ppm/°C Max, -55°C to +125°C (AD584T) - Zero Output Strobe Terminal Provided
- Two Terminal Negative Reference Capability (5 V and above)
- Output Sources or Sinks Current
- Low Quiescent Current: 1.0 mA Max
- 10 mA Current Output Capability
- MIL-STD-883 Compliant Versions Available
AD584JNZ 功能框图
| 产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
|---|---|---|---|---|
| AD584JH | 量产 | 8 ld Header | 8 | 商业 |
| AD584JN | 量产 | 8 ld PDIP | 8 | 商业 |
| AD584JNZ | 量产 | 8 ld PDIP | 8 | 商业 |
| AD584KH | 量产 | 8 ld Header | 8 | 商业 |
| AD584KN | 量产 | 8 ld PDIP | 8 | 商业 |
| AD584KNZ | 量产 | 8 ld PDIP | 8 | 商业 |
| AD584LH | 量产 | 8 ld Header | 8 | 商业 |
| AD584SH | 量产 | 8 ld Header | 8 | 军用 |
| AD584SH/883B | 量产 | 8 ld Header | 8 | 军用 |
| AD584TH | 量产 | 8 ld Header | 8 | 军用 |
| AD584TH/883B | 量产 | 8 ld Header | 8 | 军用 |
| JM38510/12801BGA | 量产 | 8 ld Header | 8 | 军用 |
AD584JNZ 应用技术支持与电子电路设计开发资源下载
- AD584 数据手册DataSheet 下载 . pdf
- ADI 模拟器件公司比较器产品选型指南 . pdf
- Analog Devices, Inc. 美国模拟器件公司产品订购手册 .pdf
