The ADG438F is a CMOS analog multiplexer comprising 8 single channels. This multiplexer provides fault protection. Using a series n-channel, p-channel, n-channel MOSFET structure, both device and signal source protection is provided in the event of an overvoltage or power loss. The multiplexer can withstand continuous overvoltage inputs from -40 V to +55 V. During fault conditions, the multiplexer input (or output) appears as an open circuit and only a few nanoamperes of leakage current will flow. This protects not only the multiplexer and the circuitry driven by the multiplexer, but also protects the sensors or signal sources which drive the multiplexer.
The ADG438F switches one of eight inputs to a common output as determined by the 3-bit binary address lines A0, A1 and A2. An EN input on each device is used to enable or disable the device. When disabled, all channels are switched OFF.
产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
---|---|---|---|---|
ADG438FBN | 量产 | 16 ld PDIP | 16 | 工业 |
ADG438FBNZ | 量产 | 16 ld PDIP | 16 | 工业 |
ADG438FBR | 量产 | 16 ld SOIC | 16 | 工业 |
ADG438FBR-REEL | 量产 | 16 ld SOIC | 16 | 工业 |
ADG438FBRZ | 量产 | 16 ld SOIC | 16 | 工业 |
ADG438FBRZ-REEL | 量产 | 16 ld SOIC | 16 | 工业 |