ADM483EARZ-REEL: ±15 kV ESD Protected, Slew Rate Limited, 5 V, RS-485 Transceiver封装SOIC-8
The ADM483E is a 5 V, low power data transceiver with ±15 kV ESD protection suitable for half-duplex communication on multipoint bus transmission lines. The ADM483E is designed for balanced data transmission and complies with TIA/EIA Standards RS-485 and RS-422, which allow up to 32 transceivers on a bus.
The ADM483E has a low current shutdown mode in which it consumes only 0.1 μA.
Because only one driver is enabled at any time, the output of a disabled or power-down driver is three-stated to avoid overloading the bus.
Drivers are short-circuit current-limited and are protected against excessive power dissipation by thermal shutdown circuitry that places their outputs into a high impedance state. The receiver input has a fail-safe feature that guarantees a logic high output if the input is open circuit.
The ADM483E is fully specified over the industrial temperature ranges and is available in 8-lead SOIC_N packages.
ADM483EARZ-REEL Applications
- Low power RS-485 systems
- Electrically harsh environments
- EMI sensitive applications
- DTE-DCE interface
- Packet switching
- Local area networks
ADM483EARZ-REEL 特点
- ±15 kV ESD protection
- 250 kbps data rate
- Reduced slew rate for low EM interference
- Single 5 V ± 10% supply
- −7 V to +12 V bus common-mode range
- Up to 32 nodes on the bus
- Receiver open-circuit, fail-safe design
- Short-circuit protection
- 36 μA supply current
- 0.1 μA shutdown current
ADM483EARZ-REEL 功能框图
| 产品型号 | 产品状态 | 封装 | 引脚 | 温度范围 |
|---|---|---|---|---|
| ADM483EAR | 量产 | 8 ld SOIC | 8 | 工业 |
| ADM483EAR-REEL | 量产 | 8 ld SOIC | 8 | 工业 |
| ADM483EARZ | 量产 | 8 ld SOIC | 8 | 工业 |
| ADM483EARZ-REEL | 量产 | 8 ld SOIC | 8 | 工业 |
