ADM489ARUZ-REEL:  Low Power, Slew Rate Limited RS-485, Contains an Additional Receiver and Driver Enable Control

The ADM488 and ADM489 are low power differential line transceiver suitable for communication on multipoint bus transmission lines.

They are intended for balanced data transmission and comply with both EIA Standards RS-485 and RS-422. Both products contains a single differential line driver and a single differential line receiver making them suitable for full duplex data transfer.

The ADM489 contains an additional receiver and driver enable control.

The input impedance is 12 kohms, allowing 32 transceivers to be connected on the bus.

The ADM488/ADM489 operates from a single +5 V ± 10% power supply. Excessive power dissipation caused by bus contention or by output shorting is prevented by a thermal shutdown circuit. This feature forces the driver output into a high impedance state if during fault conditions a significant temperature increase is detected in the internal driver circuitry.

The receiver contains a fail-safe feature that results in a logic high output state if the inputs are unconnected (floating). The ADM488/ADM489 is fabricated on BiCMOS, an advanced mixed technology process combining low power CMOS with fast switching bipolar technology.

The ADM488/ADM489 is fully specified over the industrial temperature range and is available in DIP, SOIC and TSSOP packages.

ADM489ARUZ-REEL 特点
ADM489ARUZ-REEL 功能框图

ADM489 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADM489AN 量产 14 ld PDIP 14 工业
ADM489ANZ 量产 14 ld PDIP 14 工业
ADM489AR 量产 14 ld SOIC 14 工业
ADM489AR-REEL 量产 14 ld SOIC 14 工业
ADM489AR-REEL7 量产 14 ld SOIC 14 工业
ADM489ARU 量产 16 ld TSSOP 16 工业
ADM489ARUZ 量产 16 ld TSSOP 16 工业
ADM489ARUZ-REEL 量产 16 ld TSSOP 16 工业
ADM489ARZ 量产 14 ld SOIC 14 工业
ADM489ARZ-REEL 量产 14 ld SOIC 14 工业
ADM489ARZ-REEL7 量产 14 ld SOIC 14 工业
ADM489ARUZ-REEL 应用技术支持与电子电路设计开发资源下载
  1. ADM489 数据手册DataSheet 下载 . pdf
  2. ADI 模拟器件公司比较器产品选型指南 . pdf
  3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .pdf