ADM5170ANZ:  Octal Line Driver Suitable for Digital Communication Systems with Data Rates up to 116 kB/s

The ADM5170 is an octal line driver suitable for digital communication systems with data rates up to 116 kB/s. Input TTL or CMOS signal levels are inverted and translated into either EIA RS-232E or RS-423A signal levels depending on the status of the Mode Select inputs MS+ and MS-. With both Mode Select inputs at GND, RS-423 operation is selected while with MS+ connected to VDD and MS- connected to VSS, RS-232 operation is selected.

The output slew rates may be controlled using an external resistor connected between the SRA (Slew Rate Adjust) pin and GND. Resistor values between 2 kOhm and 10 kOhm may be selected giving a slew rate which can be adjusted from 10 V/µs to 2.2 V/µs. This adjustment of the slew rate allows tailoring of the output characteristics to suit the interface cable being used.

The outputs may be disabled using the EN (Enable Input). This feature permits sharing of a common output line.

The ADM5170 is fabricated on an advanced CMOS process featuring low power consumption. In the disabled state the power consumption reduces from 500 mW to 40 mW. The ADM5170 is available in both 28-pin DIP and 28-lead PLCC packages.

ADM5170ANZ 特点
ADM5170ANZ 功能框图

ADM5170 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADM5170AN 量产 28 ld PDIP 28 工业
ADM5170ANZ 量产 28 ld PDIP 28 工业
ADM5170AP 量产 28 ld PLCC 28 工业
ADM5170AP-REEL 量产 28 ld PLCC 28 工业
ADM5170APZ 量产 28 ld PLCC 28 工业
ADM5170APZ-REEL 量产 28 ld PLCC 28 工业
ADM5170JNZ 量产 28 ld PDIP 28 商业
ADM5170JP 量产 28 ld PLCC 28 商业
ADM5170JP-REEL 量产 28 ld PLCC 28 商业
ADM5170ANZ 应用技术支持与电子电路设计开发资源下载
  1. ADM5170 数据手册DataSheet 下载 . pdf
  2. ADI 模拟器件公司比较器产品选型指南 . pdf
  3. Analog Devices, Inc. 美国模拟器件公司产品订购手册 .pdf