ADT7408CCPZ-REEL7:  ± 2°C Accurate, 12-Bit Digital Temperature Sensor

The ADT7408 is the first digital temperature sensor that complies with JEDEC standard JC-42.4 for Mobile Platform Memory Module. The ADT7408 contains a band gap temperature sensor and 12-bit ADC to monitor and digitize the temperature to a resolution of 0.0625°C.

There is an open-drain Event# output that is active when the monitoring temperature exceeds a critical programmable limit or the temperature falls above or below an alarm window. This pin can operate in either comparator or interrupt mode. There are three slave-device address pins that allows up to eight ADT7408s to be used in a system that monitors temperature of various components and subsystems.

The ADT7408 is specified for operation at supply voltages from 3.0 V to 3.6 V. Operating at 3.3 V, the average supply current is less than typically 240μA. The ADT7408 offers a shutdown mode that powers down the device and gives a shutdown current of typically 3 μA. The ADT7408 is rated for operation over the –20°C to +125°C temperature range. The ADT7408 is available in lead-free 8-lead LFCSP 3mm x 3mm (JEDEC MO- 229 VEED-4) package

产品应用领域 Applications
ADT7408CCPZ-REEL7 特点
ADT7408CCPZ-REEL7 功能框图

ADT7408 芯片订购指南
产品型号 产品状态 封装 引脚 温度范围
ADT7408CCPZ-REEL 量产 8 ld LFCSP (3x3mm) 8 工业
ADT7408CCPZ-REEL7 量产 LFCSP:LEADFRM CHIP SCALE 8 汽车级
ADT7408CCPZ-REEL7 应用技术支持与电子电路设计开发资源下载
  1. ADT7408 数据手册DataSheet下载 . pdf
  2. Analog Devices, Inc.ADI 美国模拟器件公司产品订购手册 .pdf
  3. ADC模数转换器选型指南 . pdf