FlexMod Battery Isolator Controller 系列 - Preserves Starting Battery Voltage by Isolating the Auxiliary Battery when System Voltage Drops
数据手册DataSheet 下载:Download FlexMod Battery Isolator Controller Datasheet
The FlexMod Smart Battery Isolator Controller unit monitors two battery banks and controls one or more relays or contactors to make sure starting power is protected by isolating the starting and auxiliary battery banks. Turns any electromecanical solenoid or relay into a battery isolator and works with ECM controlled alternators. System will disconnect load after 1 sec of excessive current, and auto-recover after 10 seconds.
Programmable unit can be setup with custom parameters by select authorized distributors.
特征和优势
装配: Four 9/32" (7.2mm) dia. holes
尺寸: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)
订购信息
产品号
说明
Harness Included
可编程型
48540
Unit Only
48540-01
Unit with Harness
•
48740
Programmable Unit Only
•
48740-01
Programmable Unit with Harness
•
•- Compact design (4" x 3" x 1") unit is waterproof, dustproof and vibration-proof. Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard.
- Isolates main and auxiliary batteries when system voltage drops below 12.7 Vdc, and automatically reconnects battery banks at 13.2 Vdc. Preserves starting power; eliminates downtime and jump starts due to dead batteries.
- Start assist feature provides boost to starting battery, when needed.
- Compatible with modern electronically controlled alternators (some diode Battery Isolators are not). Smart Battery Isolator Controller eliminates false battery warnings created by diode isolators.
- Status light output drives remote light, informing operator when banks are connected
- Unit is autoranging - senses 12V or 24V systems.
Ordering 订购信息
| 产品号 | Case | Connector | 说明 | 详情 | 尺寸规格 | Disconnect voltage (12V) | Disconnect voltage (24V) | 湿度 | Inductive transient | Ingress Protection |
|---|---|---|---|---|---|---|---|---|---|---|
| 48540 | Blue Thermoplastic | 8-pin Sealed Deutsch type | FlexMod Battery Isolator Controller Unit | 10 A | 4 x 2.7 x 1.31 | 12.7 V typical | 25.4 V typical | 0 to 90% RH | +/- 600 V | IP67 |
| 48540-01 | Blue Thermoplastic | 8-pin Sealed Deutsch type | FlexMod Battery Isolator Controller Unit and 12805 Harness | 10 A | 4 x 2.7 x 1.31 | 12.7 V typical | 25.4 V typical | 0 to 90% RH | +/- 600 V | IP67 |
| 48740 | Blue Thermoplastic | 8-pin Sealed Deutsch type | Programmable FlexMod Battery Isolator Controller Unit | 10 A | 4 x 2.7 x 1.31 | Programmable Attribute | Programmable Attribute | 0 to 90% RH | +/- 600 V | IP67 |
| 48740-01 | Blue Thermoplastic | 8-pin Sealed Deutsch type | Programmable FlexMod Battery Isolator Controller Unit and Harness | 10 A | 4 x 2.7 x 1.31 | Programmable Attribute | Programmable Attribute | 0 to 90% RH | +/- 600 V | IP67 |
设计资源
- Download FlexMod Battery Isolator Controller Datasheet flexmod-battery-isolator-controller
- Download FlexMod Battery Isolator Controller Datasheet flexmod-battery-isolator-controller
- 48540 - FlexMod™ Battery Isolator Controller Info Sheet flexmod-battery-isolator-controller
- 48540 - FlexMod™ Battery Isolator Controller Info Sheet flexmod-battery-isolator-controller
- 48540 & 48740 - Smart Battery Isolator Controller 2D Prints flexmod-battery-isolator-controller
