FlexMod Voltage Sensing Relays & Timers 系列 - Senses Voltage and Time While Vehicle is Off to Disconnect Auxiliary Loads
数据手册DataSheet 下载:Download FlexMod Voltage Sensing Datasheet
The FlexMod electronic voltage sensing relay & timer monitors both battery voltage and ignition status, shutting down non-critical loads when the cutoff voltage is reached, or at the set time after the ignition is turned off. It is a timer and voltage sensor in one easy-to- connect unit.
Ideal for use in emergency vehicles, the unit senses both voltage and time; after the vehicle engine is turned off, if either the cutoff voltage or time limit is reached, the Voltage Sensing Relay & Timer FlexMod will shut down the auxiliary loads. The dual technology in package provides double protection.
特征和优势
FlexMod Dual Output Voltage Sensing Relay & Timer
48742 - Controls two outputs, monitors voltage and time on both. Protects starting battery from being drained by auxiliary loads and protects battery voltage two ways. Dual output unit (controls two circuits) permits prioritization of load-shedding. Monitors voltage and time simultaneously, providing double the protection to batteries. Battery will not be drained if battery voltage gets low before timer has run out. Unit can be used as-is, with factory-programmed presets, or can be programmed by dealers to a broad scale of values.
订购信息
产品号
说明
Harness Included
可编程型
48541
Unit Only
48541-01
Unit with Harness
•
48741
Programmable Unit Only
•
48742
Dual Output Programmable Unit Only
•- Compact design (4" x 3" x 1") unit is waterproof, dustproof and vibration-proof. Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard.
- Preserves starting power; eliminates downtime and jump starts due to dead batteries. Simultaneous time and voltage sensing protects starting, even when the vehicle is running "in deficit".
- Monitors voltage and time simultaneously, providing double the protection to batteries. Battery will not be drained if battery voltage gets low before timer has run out.
- 10A rating means it can handle many loads directly or drive a relay or solenoid for higher amperage
- Unit is autoranging - senses 12 Vdc or 24 Vdc systems.
Ordering 订购信息
| 产品号 | Connector | 说明 | 尺寸规格 | Disconnect voltage (12V) | Disconnect voltage (24V) | 湿度 | Inductive transient | Ingress Protection | Load current | Load dump |
|---|---|---|---|---|---|---|---|---|---|---|
| 48541 | 8-pin Sealed Deutsch type | Voltage Sensing Relay and Timer Unit | 4 x 2.7 x 1.31 | 12.05 V min12.1 V typical12.15 V max | 24.1 V min24.2 V typical24.3 V max | 0 to 90% RH | +/- 600 V | IP67 | 10 A at 85C | + 150 V |
| 48541-01 | 8-pin Sealed Deutsch type | Voltage Sensing Relay and Timer with 12805 Harness | 4 x 2.7 x 1.31 | 12.05 V min12.1 V typical12.15 V max | 24.1 V min24.2 V typical24.3 V max | 0 to 90% RH | +/- 600 V | IP67 | 10 A at 85C | + 150 V |
| 48741 | 8-pin Sealed Deutsch type | Programmable Voltage Sensing Relay and Timer | 4 x 2.7 x 1.31 | Programmable Attribute | Programmable Attribute | 0 to 90% RH | +/- 600 V | IP67 | 10 A at 85C | + 150 V |
| 48742 | 8-pin Sealed Deutsch type | Dual Output Voltage Sensing Relay and Timer Unit | 4 x 2.7 x 1.31 | Output 1 - 11.5 Vdc / Output 2 - 12.1 Vdc | Output 1 - 23.0 Vdc / Output 2 24.2 Vdc | 0 to 90% RH | +/- 600 V | IP67 | + 150 V |
设计资源
- Download FlexMod Voltage Sensing Datasheet flexmod-voltage-sensing-relay-and-timer
- Download FlexMod Voltage Sensing Datasheet flexmod-voltage-sensing-relay-and-timer
- 48541 - FlexMod™ Voltage Sensing Relay & Timer Info Sheet flexmod-voltage-sensing-relay-and-timer
- 48541 - FlexMod™ Voltage Sensing Relay & Timer Info Sheet flexmod-voltage-sensing-relay-and-timer
- 48742 - FlexMod™ Dual Output Voltage Sensing Relay & Timer Info Sheet flexmod-voltage-sensing-relay-and-timer
- 48541 & 48741 - Voltage Sensing Relay Timer 2D Prints flexmod-voltage-sensing-relay-and-timer
- 48742 - Dual Output Voltage Sensing Relay Timer 2D Print flexmod-voltage-sensing-relay-and-timer
